hydraulic lift instructions slide channel version ... - Hydraulic Boat Lifts

If your hardware package includes Stainless Steel Square Nuts then
you MUST use anti seize paste where ever stainless to stainless
fasteners are utilized. Your local hardware will have a supply of this.
Using (2) bolts, 3/8 x 1” long, (2) washers and (2) brass square nuts per
corner, fasten as shown below. Then add the 3rd screw (5/8") washer and
square nut to the bottom hole.
Slide (1) bolt, washer and square nut up into the Post first and finger
tighten, then slide the Beam on, flush to the bottom. Tighten bolts in the
position shown.
6