hp0-y31: implementing hp network infrastructure ... - Hewlett Packard

Sample questions
Use these questions to help to assess whether you are ready to take the exam. An appendix at the end of this
guide provides answers and explanations.
1. Your network is routing multicast messages using Protocol Independent Multicast Multicast-Sparse Multicast Mode
(PIM-SM). SM). A multicast source begins to a new stream. What message does the default router for the
multicast source send?
a. a Join message to the Bootstrap Router (BSR)
b. a Join message to the Rendezvous Point (RP)
c. a Register message to the Bootstrap Router (BSR)
d. a Register message to the Rendezvous Point (RP)
2. Examine the exhibit. While configuring the HP E8212 zl switch to be an ABR for OSPF areas 0 and 2,
you entered this command in the switch’s CLI:
E5406(ospf)# area 2 stub 2 no no-summary
If you assume that all the connections are up and the OSPF routers have achieved adjacency, which
routes could you see on the E5412 zl switch in area 2? The routing tables associated with each option
are listed on the next pages.
a. A
b. B
c. C
d. D
Figure 1: Exhibit for question 2
22