screamin' eagle® - Sherwood Chapter

482 SCREAMIN’ EAGLE ®
Specialty Tools
A. Engine Assembly/Display Stand
This dual purpose engine stand provides support to the Twin
Cam Alpha (Dyna ® /Touring) crankcase during engine teardown
and assembly, and also provides a means to display
the completed engine. Heavy duty steel stand can be used
free-standing on its non-marking rubber feet, or bolted to
the bench for added stability. Stand features a laser-cut Bar
& Shield logo.
94845-10 $59.95
For use with Twin Cam Dyna and Touring engines.
b. Screamin’ EAGLE ® Engine Case Support BloCKS
This innovative tool is designed to protect the left engine case
while servicing the inner balancer bearings or performing
other general engine work. These blocks attach to the outer
side of the engine case underneath the balancer bearing pads
surface. The blocks are made of aluminum and have inserted
Delrin ® pads that rest against the case to prevent marring. The
blocks properly support the case, keeping it on a level plane
when using a press for bearing service work.
14900004 $74.95
For use on ’00-later Softail ® engines.
C. Screamin’ EAGLE Mainshaft Sprocket and
Pulley Locknut Removal and
Installation Tool
This extended-length socket is designed to fit over the long
transmission shaft simplifying the removal and installation
of the large transmission pulley locknuts. Manufactured from
hardened tool steel, the socket includes a stabilizer spacer
that keeps the threaded shaft end from hitting the socket
during removal and installation.
94137-09 $149.95
For use on ’84-’99 Evolution ® 1340-equipped models and
’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models.
94141-10 $149.95
For use on ’06-later Dyna and ’07-later Softail and Touring
models.
d. Screamin’ EAGLE Final Drive Pulley
Locking Tool
Locks the engine’s final drive sprocket so that you can loosen
the pulley nut. Pulley Lock Tool also eliminates any damage
to pulley. Use with Mainshaft Sprocket and Pulley Locknut
Removal Tool P/N 94137-09 and 94141-10.
14900003 $139.95
For use with ’80-later belt-drive Big Twin models.
e. Screamin’ EAGLE Primary Drive Locking Tool
This tool is designed to keep the primary drive system from
rotating during the installation and removal of the compensator
sprocket nut or the clutch hub nut. The tool is easily
inserted into the primary drive system and wedges in place
to restrict movement without damaging the sprocket teeth.
94102-09 $34.95
For use on ’07-later Touring models.
14900002 $34.95
For use on ’06-later Dyna and ’07-later Softail models.
f. Screamin’ EAGLE PushRod Tube Installation
and Removal Tool
This handy tool simplifies the removal and installation of the
retaining clip on Harley-Davidson ® collapsible pushrod tubes.
Convenient design reduces the risk of scratched engine parts
and hands, and the quality composite handles provide a sure
and solid grip.
94086-09 $39.95
For use on Harley-Davidson collapsible pushrod tubes.
A. Engine Assembly/Display Stand
(shown with Optional MAGNEtic
Hardware Tray)
C. Screamin’ EAGLE Mainshaft
Sprocket and Pulley Locknut Removal
and Installation Tool
b. Screamin’ EAGLE Engine Case
Support BloCKS
d. Screamin’ EAGLE FINAL DRIVE PULLEY
LOCKING TooL
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
e. Screamin’ EAGLE Primary Drive
Locking Tool
F. Screamin’ EAGLE PushRod Tube
Installation and Removal Tool