NEW - McGinns
NEW - McGinns
NEW - McGinns
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>NEW</strong><br />
SP31310<br />
$<br />
158<br />
<strong>NEW</strong><br />
SP63005<br />
$<br />
129<br />
Coil Spring Compressor<br />
• This coil spring compressor uses twin prongs &<br />
works at a pressure up to 1100kgs<br />
• Wrap over coil claws for extra safety<br />
• Max. jaw opening 230mm<br />
• Carbon steel, hardened lead screws & cast jaws<br />
• Suitable for use where<br />
space under wheel arch<br />
is limited<br />
<strong>NEW</strong><br />
SP67025<br />
$<br />
62<br />
42pc Automotive Rethreading Kit<br />
• Taps & dies are suitable for chasing out damaged<br />
threads and the removal of nicks/burrs without<br />
undercutting good threads<br />
•Thread file restores damaged external threads on<br />
any diameter<br />
• Right or left hand<br />
Brake Piston Rewind Kit<br />
• Right or left hand<br />
• Suitable for push-back & wind-back brake pistons<br />
• Includes both left & right handed thrust bolt<br />
assemblies<br />
• Helps prevent damage to<br />
pistons & seals<br />
2pc Valve Lappers<br />
• Small cup diameters 5/8" & 13/16"<br />
• Large cup diameters 1-1/8" & 1-3/8"<br />
• Hand grind small & large flat-head unslotted<br />
valves<br />
• To use place grinding compound<br />
on valve face<br />
and put in seat<br />
<strong>NEW</strong><br />
SP66115<br />
$<br />
12<br />
3/8” Dr Oxygen Sensor Socket<br />
• 3/8"dr x 22mm x 90mm long<br />
• Window in socket allows the wires attached to the<br />
sensors to be bypassed<br />
• Applications include Mitsubishi, Nissan, GM,<br />
and the Volkswagon Audi Group<br />
• For heated & non-heated lambda sensors<br />
<strong>NEW</strong><br />
SP64060<br />
$<br />
14<br />
Spark Plug Installation/Removal Tool<br />
• Fits on most common sizes of<br />
spark plugs<br />
• Flexible rubber shaft allows access<br />
in confined areas<br />
• Reduces possible cross<br />
threading on deep seated<br />
engine applications<br />
<strong>NEW</strong><br />
SP64047<br />
$<br />
12<br />
7pc Sensor Socket Set<br />
• Includes 29mm pressure/vacuum switch socket,<br />
7/8" vacuum switch socket, 27mm oil pressure<br />
sending unit socket, 1" & 1-1/16" oil pressure<br />
sending unit socket, long oxygen sensor socket<br />
& short oxygen sensor socket<br />
• Window in socket allows the wires attached to<br />
the sensors to be bypassed<br />
• Applications include Mitsubishi, Nissan, GM and<br />
the Volkswagon Audi Group<br />
• For heated & non-heated<br />
lambda sensors<br />
SP64065<br />
$<br />
99<br />
Camshaft Pulley Remover/Installation Kit<br />
• Designed to hold the camshaft pulley stationary<br />
while loosening & tightening the centre shaft bolt<br />
• Fixed distance 54 - 120mm<br />
SP71065<br />
$<br />
69<br />
Straight Type Universal Hose Clamp Plier<br />
Set<br />
• Set of pliers with<br />
interchangeable tips to<br />
cover all types of hose<br />
clamps<br />
SP72610<br />
$<br />
45<br />
Angled Type Universal Hose Clamp Plier Set<br />
• Set of pliers with<br />
interchangeable tips to<br />
cover all types of hose<br />
clamps<br />
SP72620<br />
<strong>NEW</strong><br />
$<br />
45<br />
<strong>NEW</strong><br />
<strong>NEW</strong><br />
<strong>NEW</strong><br />
www.facebook.com/sptoolsracing<br />
Austech Industries 2013 ©COPYRIGHT 15
Change language