MTC 25/247-R45 - GHM Transmission GmbH

FROM IDEA TO SERIAL PRODUCT
www.ghm-transmission.at
office@ghm-transmission.at
MTC 25/247-R45
Technical Data ( standard version )
Options
Max. input torque ( on - road ) 4500 Nm (3319 lbs.-ft) Pneum. lockable longitudinal differential
Theoretical nominal torque 2500 Nm (1844 lbs.-ft) Torque ratio front / rear 1 : 1
Max. input speed 5300 rpm External oil cooler adaption available
Shaft centre distance 350 mm (16,5 in) Gear shift neutral shift (3 positions)
Input drive direction CW / CCW electric indication (on - road)
Ratio on - road 1 : 0,9 Optional flanges available on request
off - road 1 : 1,7 Parking brake mechanically actuated
Gear shift by dog clutch type pneumatical hydraulically actuated
location
rear
positions 2
4,18 imp. / revolution
air pressure 6,5 - 9 bar Special customized solutions on request
electric indication
off - road
Front axle drive engagement type pneumatical
location
front
air pressure 6,5 - 9 bar
electric indication yes General
Oil capacity without diff. Approx. 5,5 l
Electronic
speedometer connector:
with diff. Approx. 5,0 l MTC 25 allows towing without disconnection of propeller
Max. operating oil temperature 130°C shafts when gear shift is in neutral
Weight (dry) without diff. Approx. 104 kg Installation must be approved in writing by
with diff. Approx. 112 kg GHM Transmission
Output flange front XS 120 Technical support: support@ghm-transmission.at
( XS . . . . x -serration ) rear XS 120 Inquiries: sales@ghm-transmission.at
FOR DETAILED INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.GHM-TRANSMISSION.AT
GHM Transmission GmbH
A–4400 Steyr, Wolfernstrasse 20b
Tel.: +43 (0) 7252 / 73562-164
Fax.: +43 (0) 7252 / 73562-169
© GHM Transmission GmbH
Design and specification subject to change without notice
Illustrations may show some optional equipment