Service Entrance Cable - Cerro Wire and Cable Company
Service Entrance Cable - Cerro Wire and Cable Company
Service Entrance Cable - Cerro Wire and Cable Company
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Building <strong>Wire</strong><br />
NM-B <strong>Wire</strong><br />
Cirtex ® Nonmetallic-Sheathed <strong>Cable</strong><br />
90°C Insulation<br />
With Ground <strong>Wire</strong><br />
600 Volts<br />
©2010, <strong>Cerro</strong> <strong>Wire</strong> LLC<br />
All Rights Reserved<br />
MADE IN THE USA<br />
APPLICATIONS<br />
For use primarily in residential wiring, including branch circuits for outlets, switches,<br />
etc. May be installed in both exposed <strong>and</strong> concealed work in normally dry locations.<br />
May be installed in air voids of masonry block or tile walls where these walls are not<br />
subject to excessive moisture or dampness. May be installed in locations with<br />
temperatures up to 90°C, but with the ampacity limited to that of 60°C conductors.<br />
Added Circuit: For use primarily in residential wiring for branch circuits supplying<br />
outlets located in bedrooms <strong>and</strong> other areas.<br />
CONDUCTORS<br />
Solid conductors: Soft, uncoated copper per ASTM-B3<br />
Str<strong>and</strong>ed conductors: Uncoated copper per ASTM-B3 <strong>and</strong> ASTM B8<br />
CONDUCTOR INSULATION AND JACKET<br />
Color-coded PVC (polyvinyl chloride), rated 90°C dry with clear nylon (polyamide).<br />
Added Circuit: Color-coded PVC rated 90°C: black, white, red <strong>and</strong> white with red<br />
stripe. Insulated conductors also jacketed with clear nylon (polyamide).<br />
GROUNDING CONDUCTOR<br />
Soft, uncoated copper per ASTM-B3<br />
ASSEMBLY<br />
Two-conductor constructions have the insulated conductors laid parallel. Ground<br />
wire is wrapped with paper <strong>and</strong> laid parallel between the insulated conductors. The<br />
entire construction is wrapped with a paper separator before applying the jacket.<br />
Three-conductor constructions have the insulated conductors twisted together or laid<br />
parallel to each other. Ground wire is wrapped with paper <strong>and</strong> twisted together or laid<br />
parallel to the insulated conductor.<br />
JACKET<br />
30 mil-thick PVC (polyvinyl chloride) jacket applied over the complete assembly<br />
14-2, 14-2-2 & 14-3 w/ground: white<br />
12-2, 12-2-2 & 12-3 w/ground: yellow<br />
10-2 & 10-3 w/ground: orange<br />
8 AWG or larger: black<br />
INDUSTRY STANDARDS<br />
UL 83 File # E 15119<br />
UL 719 Non-Metallic Sheathed <strong>Cable</strong> File #E9810<br />
ASTM-B3<br />
ASTM-B8<br />
Fed. Spec. A-A-59544<br />
NFPA70: NEC ®<br />
RoHS Compliant<br />
SURFACE PRINT<br />
Sample: NM-B 14-2 W/G 600V Cirtex-A (UL)<br />
REV-11/2011<br />
Electrical Division: 800.523.3869 | FAX 877.877.9563<br />
Consumer Markets Division: 866.572.3776 | FAX 812.793.2626<br />
www.cerrowire.com<br />
A Marmon <strong>Wire</strong> & <strong>Cable</strong>/<br />
Berkshire Hathaway <strong>Company</strong>