PORSCHE ®
PORSCHE ®
PORSCHE ®
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Exhausts<br />
911/S/Carrera<br />
2.7 L, 1974-1977<br />
Impact bumper models, 2 inlet exhausts<br />
N.B.: The products mentioned in this section can also be used<br />
for sport exhaust conversion for 3.0 L models<br />
92.212 (1620607000)<br />
Rear exhaust, no street use. 92.213 needed<br />
for fitting the exhaust on 91.019S and<br />
91.020S. Ø 70 mm tail pipes<br />
Painted steel<br />
92.213 (1620401110)<br />
Exhaust tubes to connect exhaust box 92.212<br />
to racing heat exchangers 91.019S/91.020S<br />
Painted steel<br />
91.014 (1620800470) left<br />
Exhaust racing tube without heating function,<br />
Ø 38 mm outside. Replacing heat exchanger<br />
91.011<br />
Painted chrome steel 409/4512<br />
91.015 (1620800480) right<br />
Exhaust racing tube without heating function,<br />
Ø 38 mm outside. Replacing heat exchanger<br />
91.012<br />
Painted chrome steel 409/4512<br />
91.019S (1623101970) left<br />
Exhaust racing heat exchanger without heating<br />
function, Ø45 mm outside. Fits 92.212 directly<br />
with use of exhaust tubes 92.213. 91.021S<br />
needed for use with standard exhausts<br />
Stainless steel 304/4301<br />
91.020S (1623101980) right<br />
Exhaust racing heat exchanger without heating<br />
function, Ø45 mm outside. Fits 92.212 directly<br />
with use of exhaust tubes 92.213. 91.021S<br />
needed for use with standard exhausts<br />
Stainless steel 304/4301<br />
91.021S (1620400110)<br />
Exhaust tube set, connecting racing heat<br />
exchangers 91.019S/91.020S to standard<br />
exhaust with 2 inlets<br />
Stainless steel 304/4301<br />
91.022S (1620101010)<br />
Racing header set with pipes to connect to standard<br />
exhaust with 2 inlets. Ø45 mm outside<br />
Stainless steel 304/4301<br />
91.011 (1623102370)* left<br />
(OE 911.211.021.60)<br />
Heat exchanger<br />
Painted aluminized steel<br />
* Not for mechanical injection models<br />
48