Fishhook Maneuver Test Procedure - SaferCar.gov
Fishhook Maneuver Test Procedure - SaferCar.gov
Fishhook Maneuver Test Procedure - SaferCar.gov
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Table A.1. Equipment Location and Weight<br />
Equipment<br />
Location<br />
Weight,<br />
typical (lbs)<br />
Data Acquisition<br />
System<br />
Front passenger seat 58<br />
Steering Machine Handwheel 31<br />
Steering Machine<br />
Electronics Box<br />
Passenger row foot well behind the front<br />
passenger seat. If vehicle does not have a<br />
rear passenger row foot well, the<br />
Electronics Box should be placed in the<br />
front passenger seat foot well.<br />
39<br />
2.1.2 Multi-Passenger Configuration<br />
The Multi-Passenger Configuration includes all elements of the Nominal<br />
Load Configuration plus ballast in the form of water dummies. Water dummies<br />
are installed as follows:<br />
For vehicles with three or more designated rear seating positions, three 175<br />
lb. water dummies are used. The water dummies shall be positioned on the rear<br />
seats (second seating row) closest to driver and front passenger seats (first<br />
seating row). If there are only two seating positions in the second seating row,<br />
the third water dummy shall be placed in the center of the third seating row,<br />
provided it is a designated seating position. Refer to Fig A.2.<br />
For vehicles with two designated rear seating positions, two 175 lb. water<br />
dummies shall be positioned in the rear seats. Refer to Fig A.3.<br />
-6
Change language