JHA System - Sonic Drilling Ltd.

More documents

Recommendations

Info

Job Hazard Analysis – Assessment and Control <strong>System</strong> Cont… Hierarchy of Control Elimination Substitution Engineering Controls Administrative Controls Personal Protective Equipment Controls identified may be a mixture of the hierarchy in order to provide minimum operator exposure. Eliminate the hazard. Provide an alternative that is capable of performing the same task and is safer to use. Provide or construct a physical barrier or guard. Develop policies, procedures practices and guidelines, in consultation with employees, to mitigate the risk. Provide training, instruction and supervision about the hazard. Personal equipment designed to protect the individual from the hazard. Take action on the assessment. Depending on the assigned Risk Level/Code (or Risk priority), take the corresponding action according to the table above: If Risk priority is LOW for a task step requires monitoring. If Risk priority is MEDIUM select and implement appropriate controls. If Risk priority is HIGH Act immediately to mitigate the risk. Eliminate, substitute or implement measures. If Risk priority is EXTREMELY HIGH immediately stop the task step until appropriate controls can be implemented. Select Action: A high risk priority means that there is a reasonable to high probability that an employee will be killed or permanently disabled doing this task step and/or a high probability that the employee will suffer severe illness or injury! Try to reduce employee exposure to the hazard by first implementing engineering, work practice, and/or administrative controls. Note the control method to be implemented in the far right column. Certify the hazard assessment: Certify on the hazard assessment form that you have done the hazard assessment and implemented the needed controls. Incorporate any new requirements that you have developed into your written accident prevention program.
Job Hazard Analysis Form Job/Task: ______________________________ Location: ______________________________ Job/Task Step Hazard Type Severity Probability Risk Code Control Method 1 (1) Note: Engineering, work practice, and/or administrative hazard controls such as guarding must be used, if feasible, before requiring employees to use personal protective equipment. Certification of Assessment *Name of work place: ________________________________ *Address _________________________________________________________ *Assessment Conducted By: _________________________ Title: ________________________ *Date(s) of Assessment ________________ Implementation of Controls Approved By: __________________________ Title: ______________________________ Date: ________________ 3
Page 1: Likelihood Job Hazard Analysis - As

JHA System - Sonic Drilling Ltd.

Create successful ePaper yourself

Delete template?

Save as template?