Frame - Paul Lange Oslany

BP-99500
Bottom bracket tool for Shimano® XTR®
- to fit and remove the cups on Shimano® XTR®, Ultegra® (from 1998 to 2003) and Truvativ® ISIS Drive® sealed
cartridge bottom brackets
- also to fit and remove the chainring lockring on Shimano® XTR® , XT®, LX®, and STX-RC® with guide PE-99501
(not included)
- hardened industrial quality chrome vanadium steel
- industrial phosphate finish
BP-99600
Bottom bracket tool for Shimano® and ISIS Drive®
BP-99600 - bottom bracket tool only
To be used with torque wrench DV-10500 (20-100 Nm) and adaptor DV-10800
BP-99620 - bottom bracket tool with a spring loaded threaded axle to hold
the tool against the cup
BP-99625 - replacement tool for BP-99630
BP-99630 - professional bottom bracket tool
BP-99630
- to fit and remove all models of Shimano®’s sealed cartridge
bottom brackets including those with Octalink® “ pipe billet ”
spindles
- compatible with ISIS Drive® for example FSA®, Race Face®,
Stronglight® (JP MX, JP 400, Twister and JP MX dh) bottom brackets
- drop-forged and hardened industrial quality chrome vanadium
steel
BP-99620
BP-99900
Bottom bracket tool for Hollowtech II® and Ultra Torque®
- for fitting and removal of Shimano XTR, Saint, Deore XT, Hone, Deore LX, Dura Ace 10 speed, Ultegra
and 105 (2006 serie) bottom bracket cups
- compatible with Campagnolo® Ultra Torque®, Truvativ GXP, Race Face X-type, FSA Megaexo and Stronglight
Pulsion Activ Link bottom brackets
- to be used with torque wrench DV-10500 (20-100Nm) and adapter DV-10800
- cold forged and hardened cromoly steel
- use tool PE-60220 to remove crank arm adjustment cap (page 22)
18 Bottom bracket
www.vartools.com