S.H.G 2011 - SHG Model Supplies

More documents

Recommendations

Info

S.H.G. MODEL SUPPLIES Mtroniks Speed Controllers & Accessories Marine Speed Controllers with BEC for D/C Motors Mtroniks speed Controllers have Digital one touch setup, Proportional Forward & Reverse, Run 6 or 12v systems, Built in BEC, Built in Failsafe, Motor Short Protection- Base size 39X34X13mm Weight app 55g Viper Marine Micro 10A Speed Controller 6-12v £21.95 Viper Marine 15A Speed Controller 6-12v £21.95 Viper Marine 20A Speed Controller 6-12v £26.95 Viper Marine 25A Speed Controller 6-12v £32.95 Viper Marine 40A Speed Controller 6-12v £49.95 Car and Boat controllers with BEC Eco 27 Speed Controller 4.8-9.6v up to 27 turn motors £21.95 Eco 20Speed Controller 4.8-9.6v6v up to 20 turn motors £34.95 Viper Truck Controller 140A 4.8-12v £65.00 Wiring items for Speed Controllers Fuse holder and Fuses State Speed Controller or fuse size required when ordering Fuses, available in:- 3 – 5 – 7.5 – 10 – 15 – 20 – 25 – 30Amp Sizes Motor Lead Pack 14G Silicon Wire Includes 4mm Bullets & Heat shrink Tamiya Power Lead for use with SLA Battery 14 Fuse Holder Fuses Tamiya Lead with heat shrink for Soldering to Battery terminals Matching Plug for Charging £2.00 £1.00 Per 5 £2.00 £2.50 “Y” Leads, various combinations for use with speed controllers £4.95 Flexible Silicone high temperature Cable silicone insulated cable is available in 1 Mtr lengths Red, Black, White, Yellow, Blue, Available in Heavy 14swg and Light 18swg Heatshrink from 1.6mm to 9mm available in assorted packs. 4.0mm Gold plated “Bullet” plug & socket Includes Heat Shrink Pk 2 Pr £1.50 Mt £2.00 Mtroniks Mixer Units Two types of Mixer units enabling mixing between rudder and throttle channels on twin engine boats, enables rudder control to operate the speed controllers for manoeuvring “V” Tail Mixer 2 channels in and two outputs for either servo or ESC £14.95 operation “W” Tail Mixer As above but with Piggyback leads on the input preventing the £16.95 need for Y leads in the installation Other leads and items for wiring can be supplied, if you can’t see what you want please ask.
S.H.G. MODEL SUPPLIES XL Moulded & Alloy Timing Pulley Drives This is a range of general-purpose timing pulleys in Moulded Resin. Suitable for most light to medium modelling applications, where a non-slip drive is required and direct drive is not an option. Ratios can be achieved to allow both reduction and increase in output shaft speed. Bore sizes Various bores or threads can be supplied for metric and imperial shafts. Pulleys are bored to customer’s requirements. Smaller pulleys up to 15 tooth have a maximum bore of 6mm or ¼” Larger pulleys have a maximum bore of 9mm, or 3/8” Plain bores are fitted with Grub Screws. Flange Diameter is 6mm greater than O/D Pulley Size Outside Dia. Face Width O/A length max Price Ea Moulded Price Ea Alloy 10 Tooth 15.67 mm 10.30 mm 20.00 mm £4.50 £14.50 12 Tooth 18.90 mm 10.30 mm 20.00 mm £4.50 £15.00 14 Tooth 22.12 mm 10.30 mm 20.00 mm £5.00 £15.50 15 Tooth 23.75 mm 10.30 mm 20.00 mm £5.00 £15.50 16 Tooth 25.37 mm 10.30 mm 20.00 mm £5.50 £16.50 18 Tooth 28.60 mm 10.30 mm 20.00 mm £6.00 £16.50 20 Tooth 31.83 mm 10.30 mm 20.00 mm £6.50 £17.50 21 Tooth 33.45 mm 10.30 mm 20.00 mm £7.00 £18.50 22 Tooth 35.08 mm 10.30 mm 20.00 mm £7.50 £19.50 24 Tooth 38.30 mm 10.30 mm 20.00 mm £8.00 £19.50 26 Tooth 41.45 mm 10.30 mm 20.00 mm £8.50 £20.50 28 Tooth 44.78 mm 10.30 mm 20.00 mm £9.00 £20.50 30 Tooth 48.00 mm 10.30 mm 20.00 mm £9.50 £20.50 XL Timing Belts Belt No. No of Teeth Pitch Length Width Price Ea 60 XL 30 Tooth 152.40 mm 9.525 mm £2.00 70 XL 35 Tooth 177.80 mm 9.525 mm £2.25 80 XL 40 Tooth 203.20 mm 9.525 mm £2.50 90 XL 45 Tooth 228.60 mm 9.525 mm £2.75 100 XL 50 Tooth 254.00 mm 9.525 mm £3.00 110 XL 55 Tooth 279.00 mm 9.525 mm £3.50 120 XL 60 Tooth 304.80 mm 9.525 mm £4.00 130 XL 65 Tooth 330.20 mm 9.525 mm £4.50 140 XL 70 Tooth 355.60 mm 9.525 mm £5.50 150 XL 75 Tooth 381.00 mm 9.525 mm £6.50 Larger sizes of belts are available to special order SHAFTS AND BEARINGS A range of shafts and bearings can be supplied for use with timing drives 15
Page 1 and 2: S.H.G 2011 SHG MODEL SUPPLIES Catal
Page 3 and 4: S.H.G. MODEL SUPPLIES VACUUM FORMED
Page 5 and 6: S.H.G. MODEL SUPPLIES FITTINGS KITS
Page 7 and 8: S.H.G. MODEL SUPPLIES Marine Radio
Page 9 and 10: S.H.G. MODEL SUPPLIES New Marine Ra
Page 11 and 12: S.H.G. MODEL SUPPLIES Nickel Metal
Page 13: S.H.G. MODEL SUPPLIES Chargers Univ
Page 17 and 18: S.H.G. MODEL SUPPLIES SINGLE RATIO
Page 19 and 20: SHG MODEL SUPPLIES GRAUPNER ELECTRI
Page 21 and 22: S.H.G. MODEL SUPPLIES Marine Coupli
Page 23 and 24: S.H.G. MODEL SUPPLIES HI - SPEC SHA
Page 25 and 26: S.H.G. MODEL SUPPLIES RUDDER ASSEMB
Page 27 and 28: S.H.G. MODEL SUPPLIES BILLINGS SHIP
Page 29 and 30: SHG MODEL SUPPLIES TRIMLINE Self-ad
Page 31 and 32: SHG MODEL SUPPLIES REVELL AQUA COLO
Page 33 and 34: PLASTRUCT FINELINE PLASTIC STRUCTUR
Page 35 and 36: S.H.G. MODEL SUPPLIES Swann Morton
Page 37 and 38: S.H.G. MODEL SUPPLIES BADGER MODEL
Page 39 and 40: Ordering We prefer to take orders b

S.H.G 2011 - SHG Model Supplies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?