Salt spray corrosion test chambers - Labomat

Installation Requirements
All cabinets are floor standing and mounted on lockable castors, so they can be easily wheeled into
position, and then secured in place for use.
The combined exhaust and drain removes waste salt water and fog form the cabinet and requires
connection to an exhaust vent to atmospheric pressure and a low level waste water drain.
The electrical connection is single phase (live, neutral and earth) and requires connection to a
mains supply rated to the Voltage & Current stated for the cabinet size.
A continuous supply of compressed air is required to atomise the salt water into fog. A supply of
pure water is required for topping up the bubble tower and for making up the salt water to be
sprayed.
Overall Dimensions