Energy efficient lighting made easy - Philips

Gears
Electromagnetic HID Gear
Master Electronic HID Control Gear
HID Primavision Compact
• Wide range of HID gear and ignitors for
general industrial applications: BSN gear for
high-pressure sodium/ BMH gear for metal
halide/ BHL gear for mercury (HPL)/ BPI
gear for quartz metal halide (HPI)/ BSL gear
for SDW-T.
• Lacquer-filled, humidity-proof ballasts for
built-in luminaires with an IP rating of 42 or
higher.
• Thermo-protected ballasts and built-in timer
ignitors with automatic end-of-life switch off
to safeguard the circuit.
• Improved Temperature behavior, and the
lifetime of 40.000 hrs (@90% survivors) is
specified at Tcase, max and/or Tambient,
max.
• High quality gear.
• Optimum system performance.
• Flicker free operation.
• 30 to 40% longer lamp lifetime.
• 10% energy saving compared to an
electromagnetic system.
• Safe and comfortable behavior when lamp
reaches end of life.
Philips green products set an example in terms
of their environmental performance and are
characterized by superior performance. Products
that carry a Green logo have been independently
reviewed by a third party as signifi cantly better in
comparison to other products on the market in at
least one of the following green focal areas:
Energy Effi ciency
Hazardous Substances
Packaging
HF Performer III for TL-D
• Energy efficient CELMA A2.
• ENEC & CE approval, complying to all
relevant international safety and performance
standards.
• Robust design for 50.000 hour lifetime at
Tcmax and over 60.000 on/off switches on.
• Programmed, flicker-free, preheated start
(< 1.6 s) enabling the lamp to be switched
on/off without reducing lamp lifetime (e.g.
for use in combination with lighting control
components).
• High power factor 0.99 with THD < 10%.
• Automatic restart after voltage dip or lamp
exchange.
• Suitable for emergency DC operation of
186V to 275V (at –10 ˚C), in line with IEC/EN
60598-2-22.
• High frequency operation; eliminating eye
strain as caused by electromagnetic ballasts.
• EMC compliant to EN 55015 2006 + A1 2007.
• Unit is protected against excessive mains
voltage and incorrect connections.
• Active power factor correction for constant
light levels independent of mains voltage
fluctuations.
HF-Performer III for TL5
• Energy efficient CELMA A2 BAT.
• ENEC & CE approval, complying to all
relevant international safety and performance
standards.
• Robust design for 50.000 hour lifetime at
Tcmax and over 60.000 on/off switches on
one lamp.
• Programmed, flicker-free, preheated start (<
1.0 s) enabling the lamp to be switched on/off
without reducing lamp lifetime (e.g. for use in
combination with lighting control components)
• High power factor 0.99 with THD < 10%.
• Automatic restart after voltage dip or lamp
exchange.
• Suitable for emergency DC operation, 186V to
275V (at –10 ˚C), in line with IEC/EN 60598-
2-22.
• High frequency operation; eliminating eye
strain as caused by electromagnetic ballasts.
• EMC compliant to EN 55015 2006 + A1 2007.
• Unit is protected against excessive mains
voltage and incorrect connections.
• Active power factor correction for constant
light levels independent of mains voltage
fluctuations.
Lifetime Reliability
Recyclability
Weight
HF-Regulator for TL-D/ TL-5
ActiLume lighting control system
• Power factor: 0.95 for TL-D/ TL-5.
• System power: 37W for TL-D, 33W for TL-5.
• Suitable for mains voltage: 220-240V/50-60Hz.
• Meets relevant IEC safety and
performance standards.
• Lamp power can be regulated down to
3% through 1-10V control input.
• Consists out of three state-of-art miniature sensors
combined with a controller containing a series of
pre-programmed modes.
• The light sensor provides automatic savings with
daylight depending regulation.
• The movement detector is sensitive to human
movements and is combined with extended delays.
• A true Plug and Play solution-used in a master and
slave luminaire concept, easy to use and easy to
install.
• Maximum comfort and energy savings of up to 75%
(in fully automatic mode and when used in
combination with Philips HFRegulatorII Touch
and DALI ballasts).
• DALI based lighting control system.
24 25