o_19fn8am61i531ght8bjkbn115qa.pdf

FOOTWEAR
FOOTWEAR
Footwear Safety Classifications
Safety footwear standard EN345 is being superseded by EN ISO
20345. Any footwear that has been tested to EN345 can continue
to be sold, however any new designs will have to be tested to the
new standard.
Which standard your footwear is tested to is identified on the
product information label, this is found within the boot or shoe.
Highest protection, toe-caps are tested to 200 Joules.
Additional Safety Features
Should these products offer some extra protective features
then the appropriate symbol will be added.
i.e. A product that provides 200 Joule impact protection, is
antistatic and has a heat resistant outsole will be marked
SB A HRO.
When you step into your
workplace you need the
right footwear: safety toe caps and
midsoles, heat-resistant outsoles,
superb grip and supreme comfort.
This is footwear for people who are
on their feet, on the move and on
top of their job.
SB Safety basic 200 Joule protection.
S1 200 Joule toe-cap protection. Closed seat region (fully
enclosed heel). Antistatic properties. Energy absorption
of seat region.
S2 200 Joule toe-cap protection. Closed seat region (fully
enclosed heel). Antistatic properties. Energy absorption
of seat region. Water penetration and water absorption
resistance.
S3 200 Joule toe-cap protection. Closed seat region (fully
enclosed heel). Antistatic properties. Energy absorption
of seat region. Water penetration and water absorption
resistance. Plus penetration resistance. Cleated outsole.
S4 200 Joule toe-cap protection. All rubber or all polymeric
footwear with antistatic properties. Energy absorption of
seat region.
S5 200 Joule toe-cap protection. All rubber or all polymeric
footwear with antistatic properties. Energy absorption of
seat region. Plus penetration resistance. Cleated outsole.
SYMBOL GUIDE
Safety Footwear
A Safety range Footwear of footwear with toe-cap protection only. All
toe-caps are tested to 200 Joules impact and 15KN
compression.
Safety Footwear with Midsole
A Safety range Footwear of footwear with toe-cap protection and
the with additional Midsole feature of a protective midsole to
safeguard the wearer against hazards underfoot.
All Super Safety Footwear conforms to the current
regulations governing this range of essential
products.
Anti-static Footwear
Antistatic Eliminates Footwear or reduces static charges by dissipating
charge into the floor.
ESD Footwear
ESD footwear provides a safe and controlled
method of discharging static electricity that
accumulates in your body.
P Penetration resistance offered by a midsole.
Safety Footwear
Safety Footwear
C Conductive footwear.
A Antistatic footwear.
HI Insulation against heat.
Safety Footwear
Safety with Midsole Footwear
CI with Insulation Midsole against cold.
E Energy absorption of seat region.
WRU Water penetration and water absorption resistance.
Antistatic Footwear
HRO Antistatic Resistance Footwear to hot contact up to 300°C.
FO Outsole resistant to fuel & oil.
WR Water resistant footwear (code I only).
Goodyear Welted
SRA Goodyear Footwear Welted is resistant to slippage on a ceramic tiled
floor with sodium Laurel sulphate lubricant.
SRB Footwear is resistant to slippage on steel with
Glycerol lubricant.
Thinsulate Lining
SRC Thinsulate Footwear Lining is resistant to slippage on steel with
Glycerol lubricant and ceramic tiled floor with sodium
Laurel sulphate lubricant.
Water resistant
Water resistant
Thinsulate Lining
A Thinsulate lightweight Lining thermal
insulation used for footwear.
Goodyear welted
A Goodyear traditional Welted and extremely robust method of manufacture.
The sewn welt secures the upper to the inner sole, the
outer sole is then attached to the welt.
Water Resistant
Water Resistant
Water Resistant penetration and water absorption resistance.
Waterproof
Water Fabric Proof / material that are impervious to water.
Water Proof
Cambrelle ® Lining
Breathable lining desiged to keep the foot warmer in
winter and cooler in summer.
FC9513 - Faxon Trainer
All our existing styles have undergone new certification as per EN ISO 20345:2011. There may be an overlap of stock in both old and
new standards during this period.
Sole design may differ to photographs.
120 121