Download a PDF - Stage Directions Magazine

Figure 1 — (a) Locate eye and mouth positions; (b) Cut out eye and
mouth openings.
Figure 2 — (a) Cut Fosshape from the bottom of the chin to nose;
(b) Overlap the cut edges to fit over the mold.
• Pin the Fosshape back to the
head form. Start from the center of
the face out; make a cut (clip) from
the bottom of the chin to the bottom
of the nose and overlap the cut
edges to reduce unnecessary fullness
and create a curved shape for the
chin. (Figure 2)
www.stage-directions.com • January 2008 35