Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Aerospace<br />
Bonding Adhesives<br />
A<br />
Company<br />
®<br />
The strength of the Loctite ® Hysol ® product<br />
range is its ability to bond many substrates<br />
including metals, glass, ceramic, wood and<br />
most plastics.<br />
The Loctite ® Hysol ® range comprises one and<br />
two component epoxy resins that offer improved<br />
clarity, less odour, better flow, high strength and<br />
great durability. They are approved and specified<br />
by engineers and designers worldwide for a<br />
wide range of bonding applications, from aerospace<br />
to electronics industries, from maintenance<br />
to original equipment manufacturers.<br />
Close attention to environmental issues means<br />
they can be shipped and used in markets<br />
worldwide without compromising performance.<br />
Hysol EA 901<br />
Hysol EA 9203<br />
Hysol EA 929NA<br />
Hysol EA 9309.1NA<br />
Hysol EA 9309.2NA<br />
Hysol EA 9309.3NA<br />
Hysol EA 9330<br />
Hysol EA 9321<br />
Hysol EA 9340<br />
Hysol EA 9394<br />
Hysol EA 9390<br />
Hysol EA 9396<br />
Hysol EA 934NA<br />
Hysol EA 956<br />
Hysol EA 960F<br />
Product Range<br />
Two-part epoxy paste adhesive<br />
Adhesive bonding primer<br />
Two-part epoxy paste adhesive<br />
Two-part epoxy paste adhesive<br />
High peel strength epoxy paste adhesive<br />
Toughened two-part paste adhesive<br />
Toughened two-part paste adhesive<br />
Strength retaining paste adhesive<br />
General purpose epoxy adhesive<br />
Strength retaining paste adhesive<br />
Good wetting characteristics, high shear moduls<br />
Excellent strength properties<br />
Compressive strength adhesive<br />
Low viscosity paste adhesive for laminating and injection<br />
Smoothing and fairing low-density paste adhesive<br />
Service<br />
Temperature<br />
200°F / 93°C<br />
300°F / 149°C<br />
200°F / 93°C<br />
200°F / 93°C<br />
180°F / 82°C<br />
180°F / 82°C<br />
250°F / 121°C<br />
180°F / 82°C<br />
350°F / 177°C<br />
200°F / 93°C<br />
350°F / 177°C<br />
300°F / 149°C<br />
77°F / 25°C<br />
77°F / 25°C<br />
Frekote ® Mold Release Coatings<br />
Loctite Frekote release coatings have been<br />
specially formulated to provide the maximum<br />
number of release agents on a wide range of<br />
surfaces, including:<br />
• Prepreg and thermoset epoxies<br />
• Rotational molded thermoplastics<br />
• Natural and synthetic rubbers<br />
• Silicones and urethanes<br />
Loctite Anti-Seize<br />
(former Felpro)<br />
Felpro C5-A ® copper based<br />
protects metal parts from rust,<br />
tested to MIL-A-907<br />
or Loctite 39893 ® solid film lubricant<br />
(former Felpro C-200 ® )<br />
or Loctite 39895 ® moly dry film<br />
(former Felpro C-300 ® )<br />
®<br />
Composites<br />
32