Cupric Sulfate - Play Psych Mun

More documents

Recommendations

Info

present and easy to do. Continue rinsing. HMIS Classification Health hazard: 2 Chronic Health Hazard: * Flammability: 0 Physical hazards: 0 Potential Health Effects Inhalation May be harmful if inhaled. Causes respiratory tract irritation. Skin May be harmful if absorbed through skin. Causes skin irritation. Eyes Causes eye irritation. Ingestion Toxic if swallowed. 3. COMPOSITION/INFORMATION ON INGREDIENTS Synonyms : Copper sulphate Formula : CuSO 4 Molecular Weight : 159.60 g/mol CAS-No. EC-No. Index-No. Concentration Copper sulphate 7758-98-7 231-847-6 029-004-00-0 - 4. FIRST AID MEASURES General advice Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician. In case of eye contact Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. 5. FIRE-FIGHTING MEASURES Conditions of flammability Not flammable or combustible. Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Special protective equipment for fire-fighters Wear self contained breathing apparatus for fire fighting if necessary. Hazardous combustion products Hazardous decomposition products formed under fire conditions. - Copper oxides, Sulphur oxides Explosion data - sensitivity to mechanical impact no data available Explosion data - sensitivity to static discharge no data available Further information The product itself does not burn. Sigma-Aldrich - C1297 Page 2 of 7
6. ACCIDENTAL RELEASE MEASURES Personal precautions Wear respiratory protection. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. 7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed. Conditions for safe storage Keep container tightly closed in a dry and well-ventilated place. Air sensitive. hygroscopic Store under inert gas. Keep in a dry place. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Contains no substances with occupational exposure limit values. Personal protective equipment Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Hand protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Eye protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin and body protection Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Hygiene measures Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Specific engineering controls Use mechanical exhaust or laboratory fumehood to avoid exposure. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Form powder Colour Safety data pH Melting/freezing light grey no data available Melting point/range: 200 °C (392 °F) Sigma-Aldrich - C1297 Page 3 of 7
Page 1: SIGMA-ALDRICH sigma-aldrich.com Mat
Page 5 and 6: no data available Respiratory or sk
Page 7: Further information Copyright 2010

Cupric Sulfate - Play Psych Mun

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?