o_19h5seu5lldu1q9e8u8k0n1fdpa.pdf

Flame Retardent
SYMBOL GUIDE
EN ISO 11612
EN ISO 11612
EN ISO 11612
EN ISO 11612
EN ISO 11611
EN ISO 11611
EN ISO 11611
EN ISO 11611
EN EN ISO 1149 11612
EN 1149
EN 1149
EN 1149
EN IEC ISO 61482 11611
EN ISO 11612:2008
Protective clothing for workers exposed to heat and flames
(not including Welders and Fire Fighters).
The standard specifies the performance requirements for
garments which protect the body from heat and flame.
EN ISO 11611:2007
Protective clothing for use in welding and allied processes.
The standard specifies 2 classes with specific performance
requirements:
Class 1 - lower level: less hazardous welding situations
Class 2 - higher level: more hazardous welding situations
EN 1149-5:2008
Protective clothing – electrostatic properties.
Antistatic PPE are certified to EN 1149-5:2008 as this
standard covers the performance requirements and refers to the
choice of 2 different test methods (EN 1149-1 or EN 1149-3)
IEC 61482-2:2009
EN ISO 11612
EN ISO 11611
EN ISO 11612
EN 1149
FLAME RETARDANT
IEC 61482
EN ISO 11612
IEC 61482
IEC 61482
EN EN ISO 1149 14116
EN ISO 14116
EN ISO 11611
EN ISO 14116
EN ISO 14116
IEC EN 61482 471
EN 1149 471
Protective clothing against the thermal hazards of an
electric arc.
This performance standard specifies requirements and test
methods applicable to materials and garments used by
electrical workers to protect against the thermal hazards of
an electric arc. Requirements address to the relevant general
properties of the textiles and the arc thermal
resistance properties.
The arc thermal performance can be tested against the
(European) Box test (representing a constrained and directed
arc), which is carried out at a current of either 4kA (class1)
or 7kA (class 2).
EN ISO 14116:2008
IEC 61482
EN ISO 14116
EN ISO 11611
EN ISO 11612
EN ISO 11612
EN 471
EN 471
EN ISO 14116
IEC 61482
EN 471
EN ISO 14116
EN 471
The Protective performance for limited flame spread of
materials, material assemblies and protective clothing to
reduce the possibility of the clothing burning and
constituting a hazard. Additional Clothing requirements
are also specified.
Index 1 = the flame does not spread, there are no flaming
debris, no after glow, a hole may be formed
Index 2 = the flame does not spread, there are no flaming
debris, no after glow, no hole formation
Index 3 = the flame does not spread, there are no flaming
debris, no after glow, no hole formation, and the after flame
time of each individual specimen is less than 2 seconds
EN 471:2003 3:2
Specifies the requirements for high visibility clothing
capable of visually signalling the user’s presence.
The high visibility clothing is intended to provide conspicuity
of the wearer in any light condition when viewed by operators
of vehicles or other mechanized equipment during daylight
conditions and under illumination of headlights in the dark.
Performance requirements are colour and retroreflection as
well as minimum areas and placement of the materials in
protective clothing.
EN 471
EN ISO 11612
Concealed stud front
Side swing pockets EN ISO 11611 in self fabric, EN 1149 side access
Reinforced stress points
Back pocket and ruler pocket
Two chest pockets with concealed single stud flap
Domestic laundry 60°C - Max 50x
Performance guaranteed up to 50 washes
Fabric 100% cotton drill, with Proban ®
flame retardant finish, 340gsm
EN 1149 IEC 61482
Sizes
EN
Leg 31.5” Chest 36” - 54”
Colour Yellow/Navy
Code FR4870
IEC 61482
EN ISO 11611
Proban ® Safety Coverall
EN471:2003 3:2
EN ISO 11612:2008 A1, A2, B1,C1,F1
EN ISO 11611:2007 Class 2, A1+A2
EN ISO 14116
EN ISO 11612
Concealed stud front
Two chest patch pockets with concealed single stud flap
EN Back ISO 11611 pocket and EN rule 1149pocket
Reinforced stress points
Side swing pockets in self fabric, side access
Stud adjuster to sleeve cuffs
Studded neck closure
Industrial Laundry 75°C - Max 50x
Performance guaranteed up to 50 washes
Fabric 100% cotton drill, with
EN 1149 IEC 61482
Proban ® flame retardant finish, 340gsm
Sizes Leg 31.5”, Chest 36”- 54”
(sizes 56” and 58” available in Navy only)
Colour Red, Royal, Orange, Navy, Vat Green
Code FR4869
IEC 61482
EN ISO 11611
Dickies Proban ® Coverall
EN ISO 11612:2008 A1, A2, B1, C1, F1
EN ISO 11611:2007 Class 1, A1, A2
EN ISO 14116
EN ISO 11612
Lightweight Pyrovatex ® Coverall
EN ISO 11612:2008 (A1 B1 C1)
Pyrovatex ® treated Lightweight 220gsm coverall; offering maximum
protection against heat and flame.
• Flame-retardant Nordic style reflective tape for enhanced visibility
EN • Extended ISO 11611collar for additional vulnerable neck/throat protection
• Generous action back for ease of movement
• Reinforced construction with feldlock triple stitching to major seams
and bar-tacks to stress points
• Side access pockets allowing entry to undergarments
• Two back pockets and rule pocket with new safety gusset feature
• High quality and long lasting, two way YKK zips
Fabric 100% Cotton with Pyrovatex
EN 1149
® FR treatment, 220gsm
Sizes Leg R 31” Chest 36” - 60”
Leg T 33” Chest 36” - 60”
Colour Red, Royal, Orange, Navy
Code FR5401
IEC 61482
EN ISO 14116
EN 471
EN ISO 14116 EN 471
Red Royal Orange Navy Vat Green
EN ISO 14116
Red
Royal
Orange
Navy
106
IEC 61482
107