OPERATING PROCEDURE & OWNERS MANUAL - Sykessler

More documents

Recommendations

Info

10455 Olympic Drive Dallas, Texas 75220 USA 214.351.0380 or 800.527.0719 214.351.1903 or 800.832.9871 FAX gemoroservice@sykessler.com www.gemoroproducts.com/warrantyregistration www.gemoroproducts.com www.auracletester.com
IMPORTANT PLEASE READ PRIOR TO USE GemOro AuRACLE AGT1 INSTRUCTION SUPPLIMENT 2 MINUTE WARM-UP PERIOD BEFORE CALIBRATING The GemOro AuRACLE AGT1 has a brief warmup period before settling into a proper calibration. Your AGT1 is a very sensitive as well as precise instrument. To obtain the most from the technology and to achieve the best results, it is recommended that you allow approximately 2 minutes after powering up before doing your initial calibration. If operating the AGT1 by its optional AC adaptor (item #2001 $19.95), after it is warmed up and calibrated you can feel free to leave it on during the entire time you intend to make use of it without fear of impacting the life of the tester. Lastly, it is recommended to check your AGT1’s calibration by testing your plumb 14K yellow gold reference sample from time to time during long operational periods to ensure that it still falls in the center of the 14K range. If it does not, simply recalibrate the AGT1.
Page 1 and 2: MODEL AGT1 PATENTED This technology
Page 3 and 4: to replace the fire assay. The AuRA
Page 5 and 6: Specifications: · Working Voltage:
Page 7 and 8: AuRACLE AGT1 Diagram: 1. LED karat
Page 9 and 10: it is recommended that the pen prob
Page 11 and 12: Also, you should then follow some c
Page 13 and 14: a different location within the ran
Page 15 and 16: condition will begin to deliver err
Page 17: Warranty Congratulations on your pu

OPERATING PROCEDURE & OWNERS MANUAL - Sykessler

Create successful ePaper yourself

Delete template?

Save as template?