Regatta 2015

110 |
BRANDING
To enable you to display your
branding or corporate messages
in a workplace or promotional
environment, all Regatta products
can be either embroidered or
printed on.
EMBROIDERY
The majority of the Regatta range can
easily be embroidered and has been
designed to allow access for embroiderers
where internal linings would be prohibitive.
Embroidering waterproof jackets will lead to
a reduction in the level of water-resistance.
The puncturing of the fabric leads to the
potential for water ingress around the
embroidery area. The remaining area of
the jacket will retain its waterproofness as
before embroidery.
PRINT
Most Regatta products can be successfully
printed without any reduction in the quality
and performance of the garment.
NB: Regatta always recommend contacting
your garment decorator as they will have
information and advice on the optimal
decoration technique.
PRINT AND EMBROIDERY
LOCATIONS
Regatta clothing can be printed
and embroidered in a variety of
locations. The most popular are
detailed below.
Right breast (as worn) - ideal as a
secondary place for decoration,
this is usually used for a sponsor logo
or area for additional information.
Left breast (as worn) - the most
traditional decoration location, the
left breast is ideal for club crest or
business logo.
Rear - Where a larger area is required
for a more impacting message, the
rear of the garment can be used. Be
it across the shoulders or down near
the hem, this is a great way to make
a statement.
Right and left sleeves - For small
scale labelling, the sleeves offer
an added opportunity to brand a
garment. They also ensure the
messages can be seen from the
side as well as the front.