Watts Regulator Company - Clean My Water

3
Water Heater Installation Products
DPS-20
Free Standing
Water Heater
Restraint System
Heavy Duty
Water Heater
Restraint System
Wall Mounted
Water Heater
Stands/Restraint
Pipe Positioning
Stub-out bars
E-75
ENS-20
WATER HEATER STANDS
Ordering Qty Per Weight Per List Price
Model Code Size Carton Carton (lbs.) (each)
DPS-20 WATER HEATER STANDS – clip together design, built-in drain pan, PVC drain connector
DPS-20 0070020 20" X 20" X 16" 4 12 $76.70
up to 50 gallon water heaters
ENS-20 WATER HEATER STANDS – enclosed for use in food processing areas
ENS-20 0070021 16" tall 4 10 74.45
FREE STANDING WATER HEATER RESTRAINT SYSTEMS – Heavy duty angle iron frame
FS-26 0070022 26" square 1 56 322.10
up to 65 gallon water heaters
FS-36 0070023 36" square 1 59 342.65
up to 120 gallon water heaters
WALL MOUNTED WATER HEATER STANDS / RESTRAINT – includes a E-100 restraint
WM-26 0070024 26" square 1 45 277.25
up to 65 gallon water heaters
WM-30 0070025 30" square 1 57 307.35
up to 120 gallon water heaters
HEAVY DUTY WATER HEATER RESTRAINT SYSTEMS – endorsed by GLAA-PHCC – double strapping system
E-50 0070026 up to 65 gallon water heaters 8 7.5 51.50
E-100 0070028 up to 100 gallon water heaters 4 15 123.65
PIPE POSITIONING STUB-OUT BARS
S18101 0070033 20" with 1 ⁄2" holes on 2" centers 50 17 3.25
S18101R 0070034 20" with Extruded 1 ⁄2" Holes 25 9 3.30
on 2" centers
S18107 0070035 20" with 1 ⁄2", 3 ⁄4" & 1" holes 50 17 3.10
on 2 " centers
S18102 0070036 20" with 1 ⁄2" on 2" centers, 3 ⁄4" & 1" 50 17 3.30
on 4" centers
S26101 0070037 26" with 1 ⁄2" holes on 2" centers 50 34 5.20
S26102 0070038 26" with 1 ⁄2" on 2" centers, 3 ⁄4" & 1" 50 34 5.20
on 4" centers
S109N 0070039 Toilet/Water Closet with three 1 ⁄2" holes 25 7 3.10
and one 1" hole
S414-50 0070040 1
⁄2" Plastic Inserts fit 1 11 ⁄32" holes 100 1 0.85
S414-75 0070041 3
⁄4" Plastic Inserts fit 1 11 ⁄32" holes 100 1 0.85
S414-100 0070042 1" Plastic Inserts fit 1 11 ⁄32" holes 100 1 0.85
S18103 0070056 20" Galvanized Steel for Plastic Inserts 50 18 2.65
1
⁄2", 3 ⁄4" & 1" in 1 11 ⁄32" holes on 2 " centers
S26103 0070057 26" Galvanized Steel for Plastic Inserts 50 23 5.20
1
⁄2", 3 ⁄4" & 1" in 1 11 ⁄32" holes on 2 " centers
S26107 0070058 26" with 1 ⁄2", 3 ⁄4" & 1" holes 50 23 5.25
on 2 " centers
S140 0070059 Insert & Snap in holes for 1 ⁄2", 3 ⁄4" & 1" 50 23 5.25
on 2" and 4" centers
S114G 0070060 Carrier Bracket-Galvanized includes 5 5 10.05
1" plastic insert
S114C 0070061 Carrier Bracket-Copper for direct 5 5 11.10
soldering of 1" copper pipe
S120 0070062 Flat Galvanized bracket with 1 11 ⁄32" 100 7 1.20
hole for 1 ⁄2", 3 ⁄4" & 1" plastic inserts
S121R 0070063 Angled Galvanized bracket with 1 11 ⁄32" 100 7 1.50
hole for 1 ⁄2", 3 ⁄4" & 1" plastic inserts
S110S 0070064 Vertical or Horizontal Waste Bracket. 25 10 8.55
1
⁄2" & 3 ⁄4" extruded holes, 1 11 ⁄32" holes
S704 0070065 "PEX" 90 Degree bend support 50 5 3.10
in bright zinc plated steel
S709 0070066 "PEX" 90 Degree bend with mounting 25 5 6.75
bracket in bright zinc plated steel
S710 0070067 Perforated Angle Mounting Bracket 50 9 1.25
w/alternating 5 ⁄32" & 1 ⁄8" holes on 13 ⁄16" centers
TSE-75 WATER HEATER STRAPS – across the front installation for zero clearance water heaters
TSE-75 0070029 – 12 3 20.35
TSE-75P plastic 0070030 – 12 3 19.30
E-75 WATER HEATER STRAPS – across the front or wrap around installation
E-75 0070031 – 12 4 25.20
E-120 0070032 – 12 5 33.45
22
Consult factory for ordering code numbers of special models/options.