O L D E N B U R G E R H O L Z P F L A S T E R - Scandia Floor

OLDENBURGER
PARKETTWERK
GmbH
RANGE OF YOUR ADVANTAGES,
OLDENBURGER HOLZPFLASTER ...
• is non-sensitive, particularly wear-resistant and
extremely suitable for extreme use – therefore
it has a very long life expectancy.
• can be sectionally removed and renewed by
machine movement from one position to the
next.
• ensures pleasant foot warmth and healthy
walking comfort.
• holds dust in place until cleaning and is easy
to maintain.
• has a positive eco-balance.
• offers high energy saving potential.
• improves the room acoustic relationship and
functions sound-absorbent.
• has an advantageous elasticity for the event that
work is done on the floor or should something
fall onto the floor.
• fulfils all requirements in accordance with the
human workstation guidelines and additionally
improves the conditions of work at the workstations.
Minimizes fatigue caused by long hours
of standing or walking, noise levels and so forth.
• has a minute electrical conductivity which reduces
the danger of industrial electric accidents
(conductivity is sufficient for the prevention of
electrostatic build-up).
• reduces the risk of irregular grout appearance
caused by laquer adhesion (e.g. Hydro-lacquer)
if the Premium Holzpflaster is equipped with an
additional factory applied edge protective
coating.
• is tested for flame resistance for example with
pine wood (22mm strength) treated with the
OPW “Firprox ® -Technology and received the
classification C fl -s1 (with the use of previously
mentioned additives).
• is economically efficient due to its long life expectancy,
the energy-saving potential, workstation
environmental improvement and the comparably
low subsequential costs.
You can get Oldenburger Holzpflaster
• in several different thicknesses and dimensions.
• in a huge number of wood species.
End grain DIN 68 702 RE
Representative rustic floor in administration
buildings and assembly places (for
example churches, theatre halls, municipality
and leisure centres) as well as in hobby rooms
and in living areas. Thickness according to DIN
from 22 mm, special thicknesses: from 10 mm
possible.
End grain DIN 68 702 WE
and wearable foot-elastic floor in
workrooms and for rooms with similar
wear criteria without extreme climate
fluctuations and without vehicular and forklift
traffic (except for light transport). Vehicular and
forklift traffic is possible by tile thickness of more
than 40 mm and the use of appropriate adhesives.
Thickness in accordance to DIN: from 30 mm,
special thicknesses are possible.
End grain DIN 68 702 GE
Flooring in industrial and commercial
applications on which special demand
criteria are made with regard to pull
and thrust movement created by high frequency
vehicular and forklift movement and/or momental
load. Thickness in accordance to DIN: from 50 mm,
special thicknesses are possible.