DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI

More documents

Recommendations

Info

Presetfunction Voltage Level Function 0 (Input = N.C. or GND) Inactive 1 (Input 10V / Input UB) Preset is activated (*). The Encoder value will be set to 0 in the moment the Preset Level will change to inactive again (falling edge) Input Resistance 10 kOhm (*) The Preset needs to be activated for at least 1 second before the falling Edge will be detected Complementfunction / DIR - function Voltage Level Encoder counting direction for clockwise rotation (view on shaft) 0 (Input = N.C. or GND) Up 1 (Input 10V / Input UB) Down Input Resistance 10 kOhm It takes 1 second before the change take effect. The Encoder value is inverted after the Complement / DIR is activated. Page 6 E Info MCD SX Version: 20101126
MAGNETIC ABSOLUTE ROTARY ENCODER SSI Mechanical Models For detailed drawings please refer our our website or directly contact us. Also available as IGES Drawing and STEP 3D Model. Flange Types Synchro Flange MCD-XXXX-XXXX-S060-XXX Housing and Connector Types Axial Cable Exit MCD-XXXX-XXXX-XXXX-CAW Blind Hollow Shaft / Hub Shaft MCD-XXXX-XXXX-B060-XXX M12 Connector MCD-XXXX-XXXX-XXXX-P8M Axial Cable Exit with Gland MCD-XXXX-XXXX-XXXX-GAW Clamp Flange MCD-XXXX-XXXX-C100-XXX Radial Cable Exit MCD-XXXX-XXXX-XXXX-CRW All units measured in [mm] Version: 20101126 E Info MCD-SX Page 7
Page 1 and 2: DATASHEET ABSOLUTE MAGNETIC ROTARY
Page 3 and 4: MAGNETIC ABSOLUTE ROTARY ENCODER SS
Page 5: MAGNETIC ABSOLUTE ROTARY ENCODER SS
Page 9 and 10: MAGNETIC ABSOLUTE ROTARY ENCODER SS

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI

Create successful ePaper yourself

Delete template?

Save as template?