Fastening to steel and timber structure Self drilling fasteners ... - EPRO
Fastening to steel and timber structure Self drilling fasteners ... - EPRO
Fastening to steel and timber structure Self drilling fasteners ... - EPRO
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stainless <strong>steel</strong> self <strong>drilling</strong> <strong>fasteners</strong><br />
<strong>Fastening</strong> <strong>to</strong> <strong>steel</strong> <strong>and</strong> <strong>timber</strong> <strong>structure</strong><br />
SX<br />
SX<br />
Technical information<br />
Application<br />
Stainless <strong>steel</strong> fastening of <strong>steel</strong> or aluminium sheet <strong>to</strong> <strong>steel</strong> or aluminium <strong>structure</strong> in one operation: <strong>drilling</strong>,<br />
thread forming <strong>and</strong> sealing.<br />
Material<br />
Fastener<br />
SX<br />
Austenitic stainless <strong>steel</strong>,<br />
grade AISI 304 (European St<strong>and</strong>ard<br />
1.4301) or grade AISI 316<br />
(European St<strong>and</strong>ard 1.4401)<br />
on request<br />
Washer<br />
S = Stainless <strong>steel</strong>, grade AISI 304<br />
(European St<strong>and</strong>ard 1.4301)<br />
Drill point <strong>and</strong> lead thread section<br />
Case hardened, special carbon<br />
<strong>steel</strong><br />
Coloured fastener<br />
Colour heads are achieved<br />
through powder coating<br />
HD headform / drive<br />
Hexagon 8 mm<br />
irius ® Ø 12 mm<br />
Washer recommendation<br />
9<br />
Ø 12-16 mm for cladding Ø 19 mm for roofing Ø 29 mm for rooflights<br />
Tools <strong>and</strong> accessories<br />
CF 400<br />
DI 650<br />
E420 / E480<br />
Au<strong>to</strong>matic setting <strong>to</strong>ol <strong>to</strong> install<br />
belted <strong>fasteners</strong> (10 pcs) with<br />
a maximum 16 mm diameter<br />
washer up <strong>to</strong> a maximum<br />
length of 40 mm<br />
Lightweight power screwgun <strong>to</strong><br />
install self <strong>drilling</strong> <strong>and</strong> self tapping<br />
<strong>fasteners</strong><br />
E420 setting <strong>to</strong>ol <strong>to</strong> install self<br />
<strong>drilling</strong> <strong>fasteners</strong> with the irius ®<br />
system<br />
E480 setting <strong>to</strong>ol is recommended<br />
for the installation of self <strong>drilling</strong><br />
<strong>fasteners</strong> with hexagon head<br />
Tools <strong>and</strong> accessories can be found in chapter 10<br />
9.2<br />
01/2013