Catalog scule de mână KNIPEX

INSULATED TOOLS
Always comply with the currently valid regulations and observe the
SAFETY INSTRUCTIONS given below:
■
Insulated tools must be transported in a manner that will prevent
any damage to the insulation.
■
Check before every use whether the insulation is damaged in any
way, defective tools must be discarded.
■
Always keep your insulated tools clean and dry.
■
Wear protective goggles when working with cutting nippers or
working overhead.
■
Always wear goggles or a facial mask when working on live
equipment.
■
Make sure the workplace is clean and orderly, particularly when you
are working on live installations.
■
Wear protective clothing and use SAFETY equipment (e.g. insulating
working spaces.
■ Use only a tool with suitable dimensions.
That will prevent slipping on the workpiece and unintentional
contact with non-insulated parts.
■
Make sure that detached parts or cut-off ends of conductors do
not fall onto live parts.
01
Combination Pliers Chrome Vanadium
DIN ISO 5746 IEC 60900 DIN EN 60900
■ for heaviest duty
■ with gripping zones for flat and round material,
suitable for versatile use
■ with cutting edges for soft, hard and piano wire
■ long cutting edges for thicker cables
■ cutting edges additionally induction hardened,
cutting edge hardness approx. 64 HRC
■ particularly wear resistant gripping jaws;
hardness of the gripping jaws approx. 53 HRC
■ Chrome vanadium heavy-duty steel, forged, oil-hardened
01 06 190
Cutting capacities
Article No.
EAN
4003773- mm Pliers Handles Ø mm Ø mm Ø mm mm² g
01 06 160 040729 160
insulated with multi-component grips, 2.0 1.5 10.0 16 201
chrome plated
01 06 190 040415 190 VDE-tested
2.5 2.0 13.0 25 320
02
High Leverage Combination Pliers
DIN ISO 5746 IEC 60900 DIN EN 60900
■
■ easier work due to optimised leverage
■
hard wire and piano wire
■ long cutting edges for thicker cables
■ with gripping zones for flat and round material,
suitable for versatile use
■ High-grade special tool steel, forged, oil-hardened
02 06 180 02 07 225
Cutting capacities
Article No.
EAN
4003773- mm Pliers Handles Ø mm Ø mm Ø mm mm² g
02 06 180 010012 180
2.5 2.0 11.5 16 247
insulated with multi-component grips,
02 06 200 010029 200 chrome plated
2.8 2.2 13.0 25 343
VDE-tested
02 06 225 010036 225 3.0 2.5 14.0 25 401
02 07 200 022299 200
2.8 2.2 13.0 25 380
chrome plated with dipped insulation, VDE-tested
02 07 225 022305 225 3.0 2.5 14.0 25 486
172