Catalog: Air System Components - Fluid Power Distributor

ARO MODULE/AIR 1000 • Components and Accessories | 9
Features Ordering
Modular Clamp Kit
One clamp kit is required to connect any two
units or accessories together in the modular
format. Kit includes: two clamps, one o-ring
and screws. To assemble, simply put the oring
and clamp between the units and tighten
screws for a secure seal.
T-Type Wall Mounting Brackets
These brackets provide easy wall mounting.
They are excellent for mounting a single
unit or multiple units which are in the
modular arrangement. T-type mount gives
good wall to unit clearance for installing
fittings and other connections. Kit includes
a bracket, clamp, two screws and o-ring.
Modular Manifold Kit
The manifold block is an excellent way to
provide circuit design flexibility. Manifold
has two 1/8” NPT ports which allow for
clean regulated air to be sent to signal or
run other equipment. Kit includes: manifold
only. Order 104263 clamp kits as needed.
Lockout, 3-Way Shut-off Valve
Meets OSHA regulation 1910.147. This
lockout valve provides a safety lock-out to
prevent accidental machine start-up. When
slider valve is shifted into the lock-out
position, inlet air is blocked and downstream
air is exhausted to atmosphere. Unit has
threaded ports for plumbing directly to an
air line or can be mounted in the modular
arrangement. Order 104263 Clamp kits as
needed.
Model No. Description
104263 Clamp Kit
(fits all port sizes)
Model No. Description
104262 T-Type Bracket Kit
Threads are NPT.
Model No. Description
104254-1 1/8” Manifold Kit
104254-2 1/4” Manifold Kit
Model No. Description
104253-1 1/8” NPT Ports
104253-2 1/4” NPT Ports
One Aro Center | P.O. Box 151 | Bryan, Ohio 43506-0151
(419) 636-4242 | (419) 633-1674 Fax | www.arozone.com