Material Safety Data Sheet â Display snow
Material Safety Data Sheet â Display snow
Material Safety Data Sheet â Display snow
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Display</strong> Snow MSDS – Page 2 of 2 – January 2003<br />
Products of combustion<br />
The main combustion product in flaming conditions is generally carbon dioxide, though<br />
lack of oxygen or rapid extinguishing of the fire often leads to the smoke still containing<br />
appreciable quantities of carbon monoxide, acrolein and aldehydes. The<br />
pyrolysis/combustion behaviour is very similar to that of wood and other cellulosic<br />
materials though there are differences in detail.<br />
Density (as a solid)<br />
30Kg/m 3 nominal density<br />
Test method: DIN 53420<br />
Colour:<br />
Environmental Advantages:<br />
Semi Opaque / White / Anti-Static<br />
Due to high performance of <strong>Display</strong> <strong>snow</strong> foam it<br />
can be reused. As with most polyethylene<br />
products the foam can easily be recycled.<br />
<strong>Display</strong> <strong>snow</strong> polyethylene flake is manufactured<br />
by a CFC and HCFC free process.<br />
5. Physical properties<br />
Anti-static <strong>Display</strong> <strong>snow</strong> is formulated to prevent the generation of static electricity during<br />
handling and distribution.<br />
The <strong>Display</strong> <strong>snow</strong> meets the following specifications:<br />
1. Static decay – less than 2 seconds from 5,000 volts to 37 volts. Tested to US<br />
Federal test method standard 101C, method 4046, in MIL-B-81705B.<br />
2. Surface resistivity – less than 10 to the power of 13 ohms/square. Tested to<br />
ASTM standard D-257.<br />
6. Other Information<br />
The statements in this document were made to the best of our knowledge and are as<br />
accurate as possible. They are given for information only. They do not constitute a<br />
contractual guarantee of a product’s properties. They must neither be altered nor<br />
transferred to other products.