Top Solid Piercing Drill Blade - Tiger-Tools Kft.
Top Solid Piercing Drill Blade - Tiger-Tools Kft.
Top Solid Piercing Drill Blade - Tiger-Tools Kft.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TPDB<br />
Technical information<br />
• Cutting oil quantity<br />
• Pressure of cutting oil<br />
[lmin]<br />
12<br />
Cutting oil quantity(Q)<br />
10<br />
8<br />
6<br />
4<br />
2<br />
[Based on 5D]<br />
[MPa]<br />
1.4<br />
Pressure of cutting oil(P)<br />
1.2<br />
1<br />
0.8<br />
0.6<br />
0.4<br />
0.2<br />
[Based on 5D]<br />
0<br />
10 15 20 25 30<br />
<strong>Drill</strong> diameter(Ø) (mm)<br />
0<br />
10 15 20 25 30<br />
<strong>Drill</strong> diameter(Ø) (mm)<br />
• Cutting power<br />
• Feed<br />
08<br />
KORLOY<br />
TECH-NEWS<br />
TPDB<br />
[KW]<br />
Cutting power(Pc)<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
[Based on 5D]<br />
10 15 20 25 30<br />
<strong>Drill</strong> diameter(Ø) (mm)<br />
[kN]<br />
Feed(Ft)<br />
5<br />
4<br />
3<br />
2<br />
1<br />
0<br />
[Based on 5D]<br />
10 15 20 25 30<br />
<strong>Drill</strong> diameter(Ø) (mm)<br />
How to clamp a TPDB insert<br />
• Clamping an insert on a holder<br />
• Changing an insert on the machine<br />
➡<br />
[Pic.1] [Pic.2] [Pic.3]<br />
- Put an insert in the holder.<br />
- As the Pic.1, clamp the insert while<br />
pushing it to the V shaped groove<br />
of the holder.<br />
- Screw the insert.<br />
- Separate the insert from the holder.<br />
- As the Pic.2, clean the insert seat<br />
- Place the insert to the mounting seat.<br />
- As the Pic.3, clamp the insert while pushing it to the V<br />
shaped groove of the holder.
Change language