CONTROLS - Jersey Harley-Davidson

510 CONTROLS
Hand Grip & Foot Control Collections
EDGE CUT COLLECTION
Live your life on the edge. The Edge Cut Collection features
a crisp anodized finish that is machined to expose the highlights
of raw aluminum. The contrasting cut back look makes
a powerful visual statement, and works great with both traditional
and contemporary customizing styles.
A. EDGE CUT HAND GRIPS
The hand grips are a comfortable 1.5" diameter, and the
machined slots and narrow rubber bands offer plenty of traction,
with or without gloves. Glueless design permits removal
for servicing without damage.
57454-10
Fits ’96-later VRSC, XL, XR, Dyna ® , Softail ® (except
FLSTSE2/3 and FXSBSE) and ’97-’07 Touring models.
57457-10
Fits ’08-later Touring and FLSTSE2/3 models.
B. EDGE CUT FOOTPEGS
The slim footpeg design allows a comfortable pivot point, and
the wide surface and narrow rubber bands hold your boots
firmly in place.
49312-10 Footpegs.
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSBSE, ’07-later XL883N, XL1200N, XL1200V, XL1200X,
’07-’10 XL883L, ’11-later XL1200C and ’08-later XR models).
50500030 Footpegs with Styled Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C,
’10-later XL1200X, ’08-’11 FXCW, FXCWC and ’11-later FXS
models.
A. EDGE CUT HAND GRIPS
Shown with:
EDGE CUT SHIFTER PEG
Shifter pegs feature a slim design for easy access, and narrow
rubber bands that protect your boot toe from abrasion
during shifting.
34671-10
Fits all models (except ’06-later VRSC models with forward
controls and ’08-later XR models).
C. EDGE CUT BRAKE PEDAL PADS
Available in two sizes, the brake pedal pads feature deep
surface grooves and narrow rubber bands for traction during
application.
41449-10 Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring models.
42847-10 Small.
Fits ’84-later FX Softail (except FXSTDSE) and ’93-later Dyna
models equipped with forward controls.
D. EDGE CUT FOOTBOARD INSERT KITS
Machined from billet aluminum, these footboard inserts retain
the cast-in vibration isolation found on Original Equipment
footboards. The over-molded rubber provides both comfort
and traction while riding. Kit includes right and left insert.
54187-10 Rider – Traditional Shape.
Fits ’12-later Dyna FLD, ’86-later FL Softail and Touring
models with traditional-shaped rider footboards.
54196-10 Passenger – Traditional Shape.
Fits ’06-later Dyna and ’86-later Softail and Touring models
equipped with traditional-shaped passenger footboards.
B. EDGE CUT FOOTPEGS AND SHIFTER PEG C. EDGE CUT BRAKE PEDAL PADS
D. EDGE CUT RIDER FOOTBOARD INSERTS –
TRADITIONAL SHAPE (SHOWN WITH
LARGE EDGE CUT BRAKE PEDAL PAD)
D. EDGE CUT PASSENGER FOOTBOARD
INSERTS – TRADITIONAL SHAPE