Delta Power Company - Power-Hydraulik
Delta Power Company - Power-Hydraulik
Delta Power Company - Power-Hydraulik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECIAL APPLICATION VALVES <strong>Delta</strong> <strong>Power</strong> <strong>Company</strong><br />
4484 Boeing Drive - Rockford, IL 61109<br />
In-Line Valves<br />
GPM PSI LPM BAR MODEL PAGE<br />
8 3000 30 207 IM-CVA 548<br />
6 3000 23 207 IM-CVF-11 550<br />
6 3000 23 207 IM-CVF-13 552<br />
10 3500 38 241 IM-CSB 554<br />
Typical Schematic<br />
Typical application is the CVA is load holding in a lift, check and dump circuit.<br />
Typical application for the CVF is to mounted directly in the bottom of a cylinder and sized 1-2 GPM higher then the<br />
lowering speed. There fore the load will not free fall in the event of line damage. Valve will not re-open until pressure is<br />
bled off port (1).<br />
Typical application for the CSB is load sense with motor circuit with a spring loaded brake.<br />
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described<br />
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.<br />
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com<br />
Page 547