Download - Power Commander

Ignition Quick Shifter Kits
Features
• User adjustable “kill times”
• Uses normally OPEN style sensors
• Universal fit
• Uses Adaptive Shift Technology for low speed seemless shifts
These units allow any vehicle with 4 cylinders or less (motorcycle, ATV, mini sprint, etc.) to have quick shifter functionality without the need for a Power
Commander. It comes with “coil cap” style connectors for easy installation on most late model motorcycles. For applications that do not have this
style of coil, the connectors can be removed and the unit hard wired in.
Additionally the unit features “Intellishift”. The controller automatically staggers the “kill times” to cylinder for increased smoothness during lower rpm,
part throttle shifts.
No computer is required for setup. Installation can be done in as little as 30 minutes. Must be used with one of the 3 DQS shift sensors (sold
separately).
Ducati Universal Kit
4-120
Honda CBR250r Kit
4-122
KAwaskai EX250 Kit
4-123
Dynojet’s Wide Band 2 is the second generation of Dynojet’s
popular Wide Band Air/Fuel Ratio Monitor kit with digital
technology, quickest response in the industry, all with a lower
price and a more compact package.
Sends wideband data to PCV/CMD to enable AutoTune feature!
Product Features
• One wire RPM hookup
• 0-5v Analog Input (TPS, MAP, etc)
Specifications
Power Requirement: 11.5-15v, 3A
Dimensions:
2.80”w x .56”h x 1.488”d
Range:
.68 lambda - ambient air
Inputs:
Analog, 0-5v
Digital, Square wave, 0-12v nominal
(coil (-) tachometer signal)
Outputs:
Gauge Driver
0-5v analog
Calibrated AFR
0-5v analog
Simulated Narrow Band
Expansion Connectivity: CAN based
(CAN Link cable required)
• Built-in Sensor Condition Test
• Durable enclosure and wire
• sheathing for years
of trouble-free operation
Wide Band 2 Kits
Wide Band 2 Base Kit -15-7003
The Wide Band 2 Base Kit includes:
• Wide Band 2 Control Module
• Bosch 5 wire LSU4.2 Wide Band Sensor
with harness
• 18mm x 1.5mm Sensor Boss and Plug
Wide Band 2 - Color
Touch Screen LCD Kit -15-7008
Monitor and record AFR, (1) Analog Input, and
RPM (Record feature requires optional SD
memory card).
Wide Band 2 - digital/Analog
gauge kits - See Below
Kit Includes the Wide Band 2 Base kit and your
choice of either a Black/White Digital or Black /
White Analog Gauges.
Dirt Bike/ATV Quick Shifter 4-121
This unit allows any single cylinder vehicle to have quick shifter
functionality without the need for a Power Commander. It comes with
DENSO style “coil cap” connector for easy installation on most late
model applications. For applications that do not have this style of coil,
the connector can be removed and the unit hard wired in.
Optional Quickset Adjuster
• Long travel sensor designed to keep unit away from riders
boot and from the bikes chain.
• Sensor is fully waterproof and immune to temperature
• Optional remote quickset adjuster allows you to adjust kill
times on the fly.
Optional Wide Band 2 Gauges & Harnesses
Available Ignition Quick Shifter Kits and Accessories
Dynojet CAN-Link Cables
Connects the Wide Band 2 to the network of
Dynojet performance and diagnostic modules.
Sends wideband data to PCV/CMD to enable
AutoTune feature.
Data Acquisition / Gauge
Combination Harness -76950118
Allows the Wide Band 2 to simultaneously drive
a data acquisition device and optional gauge.
Product Description Part #
Wide Band 2 Kits
Wide Band 2 Base Kit 15-7003
Wide Band 2 Kit - with Color LCD Unit 15-7008
Wide Band 2 Kit - with White Digital Gauge 15-7007
Wide Band 2 Kit - with Black Digital Gauge 15-7006
Product Description Part #
Ignition Quick ShifterS
Ignition Quick Shifter (control box only) - requires shifter sensors 4-118
Ducati Stand Alone Ignition shifter (control box only) - requires shifter sensors 4-120
Off-Road Quick Shifter Kit (includes Sensor and Control Box) 4-119
Optional Quickset Adjuster 61100014
Honda CBR250R Kit (includes Sensor, Shift Rod and Control Box) 4-122
Wide Band 2 Kit - with White Analog Gauge 15-7005
Wide Band 2 Kit - with Black Analog Gauge 15-7004
Wide Band 2 harnesses
Data Acquisition / Gauge
Combination Harness
76950118
Dynojet CAN Link Cable 36” 76950117
Dynojet CAN Link Cable 18” 76950145
Dynojet CAN Link Cable 6” 76950143
Kawasaki EX250 Kit (includes Sensor, Shift Rod and Control Box) 4-123
16 Toll Free 1-800-992-4993
2013 Dynojet Powersports catalog
17