POWERSPORTS PRODUCTS CATALOG

SUZUKI DRZ 400S
OFFROAD / SUZUKI DRZ 400 – SUZUKI DRZ 400SM
515.402.8000 | WWW.PIVOTWORKS.COM
KIT TYPE Year Part # PRICE
Fork Rebuild Kit 2000-2001 PWFFK-S01-400 $74.95
KIT TYPE Year Part # PRICE
RW Watertight Wheel Collar Kit 2000-2001 PWRWC-S05-500 $59.95
SUZUKI DRZ 400SM
KIT TYPE Year DESCRIPTION Part # PRICE
Bottom End Kit 2000-2009 Kit contains crankshaft, main bearing/seals and complete gasket set for complete installation. CBK0095 $529.95
2000-2009
Kit contains stroker crankshaft, main bearing/seals and complete gasket set for complete installation.
+4mm stroke. Makes 424cc. Uses stock piston. Bolt in and go!
CBK0165 $609.95
Crankshafts 2000-2009 Heavy Duty OEM Replacement crankshaft. 4059 $325.95
Stroker Crankshafts 2000-2009
Heavy Duty (+4mm stroker) makes 424cc. Uses stock piston. Bolt in and go! When using
Cylinder Works #41001-k01 makes 469cc.
515.402.8100 | WWW.HOTRODSPRODUCTS.COM
4259 $404.95
Stroker Piston 2005-2009 (92mm) makes 449cc must be used with Hot Rods stroker crank 4159. 12.75:1 P6001 $255.95
Main Bearing & Seal Kit 2000-2009 K049 $64.95
Water Pump Kit 2005-2009 WPK0053 $49.95
KIT TYPE
Year
Center To
Center
Small End
Bore
Big End
Bore
Small End
Width
Big End
Width
Small End Bearing Big End Bearing Pin Diameter Pin Length
Washer
Thickness
Connecting Rods 2000-2009 107 20 43 20 21.8 Bushing 35x43x21.7 35 61.8 Not Used 8630 $149.95
Part#
Price
515.402.8000 | WWW.PIVOTWORKS.COM
KIT TYPE Year Part # PRICE
Fork Seal Kit 2005-2009 PWFSK-Z002 $38.95
Front Talon Hub Bearing Kit 2005-2008 PWFWK-Z01-000 $19.95
Front Wheel Bearing Kit 2005-2009 PWFWK-S24-000 $46.95
Linkage Rebuild Kit 2005-2009 PWLK-S39-000 $89.95
Rear Talon Hub Bearing Kit 2005-2009 PWRWK-Z01-000 $21.95
KIT TYPE Year Part # PRICE
Rear Wheel Bearing Kit 2005-2009 PWRWK-S17-400 $24.95
RW Watertight Wheel Collar Kit 2005-2009 PWRWC-S05-500 $59.95
Shock Absorber Kit 2005-2009 PWSHK-S09-021 $39.95
Steering Stem Bearing Kit 2005-2009 PWSSK-S04-421 $49.95
Swing Arm Kit 2005-2009 PWSAK-S15-400 $69.95
STAGE Year DESCRIPTION Part # PRICE
STAGE 1 2000-2009
STAGE 1 2000-2009
STAGE 2 2000-2009
STAGE 2 2000-2009
This cam replaces the 2047-1IN. It has better low RPM torque, pulling power and throttle response. For best results, it should be used
with the #2050-1E exhaust cam. Uses stock DRZ400 valve springs. If installed in LTZ400, you must install DRZ400 valve springs.
This cam replaces the 2048-1E. It has better low RPM torque, pulling power and throttle response. For best results, it should be used
with the #2049-1IN intake cam. Uses stock DRZ400 valve springs. If installed in LTZ400, you must install DRZ400 valve springs.
The #2251-2IN and #2252-2E are designed to be used as a set. These cams will provide improved full throttle torque and horsepower
at all RPM 4000 and up. Uses stock DRZ400 valve springs. If installed in LTZ400, you must install DRZ400 valve springs.
The #2251-2IN and #2252-2E are designed to be used as a set. These cams will provide improved full throttle torque and horsepower
at all RPM 4000 and up. Uses stock DRZ400 valve springs. If installed in LTZ400, you must install DRZ400 valve springs.
515.402.8005 | WWW.HOTCAMSINC.COM
2249-1IN $179.95
2250-1E $199.95
2251-2IN $179.95
2252-2E $199.95
KIT TYPE DESCRIPTION Part # PRICE
9.48mm Complete Shim Kit 1.20-3.50mm in .05mm increments with 3 shim in each size HCSHIM02 $89.95
powersports
2013 catalog 159