Z-801RX On/Off Switch - ProSyst - Developer Zone

32
ZigBee ® RF Module
RF Module
Z-100
Z-100 is a surface-mounted module, user can
establish IEEE 802.15.4 system using this module for
short time to market and the cost effective. Use this
system will help user minimize development effort and
skip the complicated RF design stage and the high-cost
testing and development. 2 module types are available: Z-
100TC chip-antenna and Z-100TI IPEX connector. Both
supports pre-program communication range through
network protocol stack.
Z-100 meets the standards of EN 300 440, US FCC
CFR47 Part 15 and Japan ARIB STD-T66 standard.
Z-100
ZigBee ® RF module
Product Version
Z-100TC V5.3
Equipped with Chip-antenna
Z-100TI V5.3
Equipped with IPEX connector
Main Features
• High performance and low power consumption 8051 MCU
• 2.4 GHz IEEE 802.15.4 standard transceiver
• Excellent receiver sensitivity
• Wide Power Voltage Range( 2.0V - 3.6V DC)
• Digital RSSI/ LQI support and strong DMA function
• Equipped with battery detection and temperature sensor
• Two programmable USART available, supports several serial
protocol.
• Equipped with 1 MAC timer compatible with IEEE 802.15.4 , 1
general 16-digit timer and two 8-digit timers.
• CC2430 works with TI CC2430 ZDK
Technical Parameters
Output Power:
Receiver Sensitivity:
Communication Range:
Data Transmission Rate:
Frequency:
Channel :
Working Voltage:
Consumption:
-3 dBm to 0 dBm
-90 dBm
Up to 100 meters outdoor
250 Kbps
2.4-2.4835 GHz
16
2.0 to 3.6 VDC
@receiving mode 33mA
@transmitting mode 33mA
@operating mode 190uA
@standby mode0.8uA
Operating Ambient:
Temperature -10~50℃
Humidity max. 95%RH
Product Dimension:
16mm × 22mm × 2.85mm