TEST REPORT - Skeppshult
TEST REPORT - Skeppshult
TEST REPORT - Skeppshult
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Date<br />
Our reference<br />
2009-02-05 F 900978-4 B Page 4 of 4<br />
Inspection<br />
Clause Regarding<br />
Comments<br />
4.2 Sharp edges Fulfils the requirement<br />
4.3.1 Security of screws Fulfils the requirement<br />
4.3.2 Minimum failure torque Fulfils the requirement<br />
4.3.3 Foldable bicycle Not applicable<br />
4.5 Protrusions Fulfils the requirement<br />
4.6.1 Braking-systems Fulfils the requirement<br />
4.6.2.1 Brake-lever position Fulfils the requirement<br />
4.6.5 Brake adjustments Fulfils the requirement<br />
4.7.1 Handlebar dimensions Fulfils the requirement<br />
4.7.3 Handlebar stem-depth mark Fulfils the requirement<br />
4.7.4 Handlebar stem-extension to fork Fulfils the requirement<br />
4.7.5 Steering stability Fulfils the requirement<br />
4.8.1 Suspension frame Not applicable<br />
4.9.2 Front fork – Location front axle Fulfils the requirement<br />
4.10.2 Wheel assembly - Clearance Fulfils the requirement<br />
4.11.1 Mark - Tyres inflation pressure Fulfils the requirement<br />
4.11.2 Tyre – 110% of max pressure Fulfils the requirement<br />
4.13.1 Pedal tread Fulfils the requirement<br />
4.13.2 Pedal clearance Fulfils the requirement<br />
4.14.2 Saddle - Dimensions Fulfils the requirement<br />
4.14.3 Seat-pillar - Depth mark Fulfils the requirement<br />
4.15 Drive chain – Without binding Fulfils the requirement<br />
4.16 Chain guard Fulfils the requirement<br />
4.17 Spoke protector Fulfils the requirement<br />
4.19 Handling of bicycle Fulfils the requirement<br />
5 Manufacturers instructions Fulfils the requirement<br />
6.1 Marking Fulfils the requirement<br />
SMP Svensk Maskinprovning AB<br />
Div. for testing<br />
Jan-Olof Nilsson<br />
Senior Testing Engineer<br />
Enclosure: Documentation supplied by the client
Change language