AGCO BELTING and ACCESSORIES - AGCO Parts
AGCO BELTING and ACCESSORIES - AGCO Parts
AGCO BELTING and ACCESSORIES - AGCO Parts
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CCIL<br />
660<br />
COCKSHUTT<br />
2/402/E2<br />
501<br />
Make-Model<br />
HESSTON<br />
1200 (Up to 1993 Production)<br />
(700710161)<br />
(700710162)<br />
(700710163)<br />
(700710162)<br />
(700710164)<br />
(700712956)<br />
(700712957)<br />
(700712956)<br />
(700712958)<br />
(700712959)<br />
(700712960)<br />
(700712961)<br />
Cut<br />
24’<br />
24’<br />
Ext.<br />
12’<br />
15’<br />
Ext.<br />
21’ LH<br />
21’ RH<br />
25’ LH<br />
25’ RH<br />
30’ LH<br />
30’ RH<br />
35’ LH<br />
35’ RH<br />
21’ LH<br />
21’ RH<br />
25’ LH<br />
25’ RH<br />
30’ LH<br />
30’ RH<br />
35’ LH<br />
35’ RH<br />
Pull-Type Swather Belts<br />
Size<br />
41” x 210”<br />
41” x 245.5”<br />
41” x 41.5”<br />
41” x 208”<br />
41” x 275”<br />
41” x 80”<br />
(Refer to White 601)<br />
42” x 142” Recessed Slat<br />
42” x 277” Recessed Slat<br />
42” x 238” Recessed Slat<br />
42” x 277” Recessed Slat<br />
42” x 247” Recessed Slat<br />
42” x 142” Full Slat<br />
42” x 277” Full Slat<br />
42” x 238” Full Slat<br />
42” x 277” Full Slat<br />
42” x 244” Full Slat<br />
42” x 367” Full Slat<br />
42” x 296” Full Slat<br />
42” x 434” Full Slat<br />
Part No.<br />
-<br />
-<br />
-<br />
M67410208<br />
M67410275<br />
M67410080<br />
M67420142R<br />
M67420277R<br />
M67420238R<br />
M67420277R<br />
M67420247R<br />
M67420368R<br />
M67420297R<br />
M67420435R<br />
(700710165)<br />
42” x 367” Recessed Slat<br />
(700710965)<br />
42” x 296” Recessed Slat<br />
(700712966)<br />
42” x 434” Recessed Slat<br />
Technical Note: The full slat will not fit on older 1200 series Hesston P.T. Swathers (pre-1994) due to interference<br />
in the draper guide tract flange at the rear of the header. Full slats may be used if this flange is removed. You<br />
may also cut off the “D” rings on the underside of the cutter bar that ties down machine during shipment. “D”<br />
rings can build up trash <strong>and</strong> effect draper tracking. In 1993 <strong>and</strong> newer models, “D” rings were repositioned to<br />
eliminate this build-up potential<br />
1200 (1993 Production & Later)<br />
(700712955)<br />
M67420142<br />
M67420277<br />
M67420238<br />
M67420277<br />
M674202470<br />
M674203670<br />
M67420296<br />
M67420434<br />
INTERNATIONAL HARVESTER<br />
200<br />
(597-112-R92)<br />
12’<br />
(597-113-R92)<br />
16’<br />
1964 & Later<br />
(597-115-R92)<br />
Cross Conv.<br />
(597-116-R92)<br />
Ext.<br />
(597-117-R92)<br />
Rear Delivery<br />
41.5” x 193”<br />
41.5” x 291”<br />
41.5” x 256”<br />
41.5” x 39.25”<br />
41.5” x 123”<br />
M67415193<br />
M67415291<br />
M67415256<br />
M67415039<br />
M67415128<br />
38