water accumulation in footwell / plugged soft top drains - Miata.net

More documents

Recommendations

Info

Bulletin No: 09-046/10© 2010 Mazda Motor of America, Inc.Last Issued: 10/15/2010DRAIN VALVE REPLACEMENT1. Disassemble the drain valve assembly. Note installation position of the lower valve for proper orientationduring assembly.TO VEHICLE BODYTO DRAIN COVER1736hLOWERVALVEUPPERVALVEBLACKHOSE2. Replace the upper and lower valves with modified ones.NOTE:The modified valves can be identified by the ribs inside the valve.LOWERVALVEUPPERVALVERIBS1736i3. Install the modified lower valve in the same position as the old valve when removed.Page 6 of 15
Bulletin No: 09-046/10© 2010 Mazda Motor of America, Inc.Last Issued: 10/15/20104. Install the modified upper valve with the small end inside the drain valve assembly hose.BE CAREFUL OF THEDIRECTION TO WHICH THEUPPER VALVE FITTED.SMALLDIAMETERLARGEDIAMETER1736jLOWERVALVEUPPERVALVETOWARDDRAINCOVER5. Using seat belt retractor hole for access, install drain valve assembly. Connect upper valve to drain coverhose and plug lower valve into body.NOTE:Insert fingers into drain cover hose from top to aid when installing upper valve into drain coverhose.1736kDRAINCOVERRETRACTORHOLEINSTALLED DRAINVALVE ASSEMBLYPage 7 of 15
Page 1 and 2: Service BulletinMazda North America
Page 3 and 4: Bulletin No: 09-046/10© 2010 Mazda
Page 5: Bulletin No: 09-046/10© 2010 Mazda
Page 15: Bulletin No: 09-046/10© 2010 Mazda

water accumulation in footwell / plugged soft top drains - Miata.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?