12 1-800-727-5477 • www.sargentlock.com - ASSA ABLOY

DIM "X"
90705:A 5/6/11 Copyright © 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
1/8" (3mm)
Mortise Cylinders
Degree Key System
DG1-, DG2- & DG3- Series Mortise Cylinders
For use with Mortise Locks,
Standard Degree Mortise Cylinders supplied with:
Exit Devices and Auxiliary Locksets • Solid brass, 6 pin cylinder, 1-5/32" (29mm) diameter
Mortise Fixed Core (FC)
1-11/32"
(34mm)
Degree Mortise Cylinders
Type Degree Level Cylinder Size Cam(s)
Degree Mortise Cylinders DG1-, DG2- or DG3-
41 (1-1/8"); 42 (1-1/4");
43 (1-3/8"); 44 (1-1/2"); 46 (1-3/4")
Std, 101, 104, 105,
106, 112 & 113
Exposed Plug DG Mortise Cylinders (Specify 78-) DG1-, DG2- or DG3- 41 (1-1/8"); 42 (1-1/4"); 43 (1-3/8") Standard or 105
How to Order DG Series Mortise Cylinders less hardware
• TA keyway standard - see page 13 for available keyways
• No. 97 rosette and compression spring, when hardware is ordered less cylinder
• Offset cam DG-0001 standard - see available cams on page 5
• Factory keyed
Quantity Options* Cylinder Size Cam Key Set Door#/Item# Finish†
75 DG1- 41 Std AA1 26D
Available options for Degree Mortise Cylinders are: DG1-, DG2-, DG3-, 21-, 60-, 63-, 64-, 65- & 78-
How to Order DG Series Cylinder with Hardware (8200 Mortise example)
Quantity Options** Series & Function Rose/Escutcheon Lever Finish† Hand Keying Detail
95 DG3- 8205 LN MX 15 RH AA1
** Available options for Degree Mortise cylinders ordered with hardware are: DG1- DG2-, DG3-, 21-, 60-, 63- & 64-
(78- cylinders are determined by the function or trim specified and are not specified when ordering)
4
DIM "X"
1/8" (3mm)
3/16"
(5mm)
SARGENT standard
cam shown
Options
1-800-727-5477 • www.sargentlock.com
Length under cylinder head
Cylinder No. 41 42 43 44 46
DIM “X”
†Finishes available: 03, 04, 09, 10, 10B, 10BL, 14, 15, 20D, 26, 26D
• Construction Master Keying (21- option)
– Allows use of construction keys until change
key voids operation
– Ships 3/16" with 6 master construction keys
(5mm)
separate from change keys
• Removable Disposable Construction Core
(60- option)
– Operate with coin or flat screw driver
– Easy installation
• Removable Core (63- option)
– Control key releases locking cam for
removal of core
– 2 control keys furnished standard
• Removable Construction Keyed LFIC (64- option)
– Furnished with 6 keys and 1 control key
standard
– Plug face dimpled for easy identification
• Unassembled/Uncombined Core (65- Option)
– DG1 and DG2 only
– Includes two key blanks but no pins, springs
or slide
– When ordered with hardware, 65-DG cylinders
are packed uninstalled with hardware
• Exposed Plug only (78- option)
– Exposed plug 560” (14mm) diameter
– For use with trim LE3/LE4 & KE3/KE4; specify
78- only when cylinder is ordered less product
– Supplied with standard offset cam DG 0001;
optional cam 105 for use on inside of
7816/8216/9200 locks only
1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-3/4"
(29mm) (32mm) (35mm) (38mm) (44mm)