Locksmith Tools Section 10 - Southern Lock & Supply Co.

MAJORTAD03LLocksmithsHole Saw KitContents:Four PD4 pilot drills.One each of the folowing:TAD12 (3/4");TAD14 (7/8");TAD16 (1");TAD22 (1-3/8")TAD24 (1-1/2");LOCKSMITH TOOLSHIT-48 Series Carbide Tipped Hole SawsTired of drilling wood doors with hole saws designed for drilling steel? Tired of backing the hole saw out and cleaningthe teeth? Then try the HIT-48 series hole saws designed to drill wood. The three carbide teeth will not gum or load upand are clean cutting. Hole saws can be used on your existing commercial type mandrel if the 1/4” diameter pilot bit ischanged out to a longer one, see part # HIT-48-300, or just use with our mandrel.THESE HOLE SAWS ARE FOR WOOD ONLY!NOT FOR USE ON STEEL.HIT-48-100Three tooth 1” diameter carbide tippedhole saw designed for wood andfiberglass doors. Requires a mandrelwith a longer than normal pilot bit.Use mandrel # HIT-48-310.Order # Item # Catalog Price527-0320 HIT-48-100 $22.50HIT-48-114Three tooth 1-1/4” diameter carbidetipped hole saw designed for woodand fiberglass doors. Requires a mandrel with a longerthan normal pilot bit. Use mandrel # HIT-48-320.527-0325 HIT-48-114 $25.00HIT-48-138Three tooth 1-3/8” diameter carbidetipped hole saw designed for wood &fiberglass doors. Requires a mandrelwith a longer than normal pilot bit.Use mandrel # HIT-48-320.527-0330 HIT-48-138 $27.00MORSEMORSEHole SawsTAD26 (1-5/8");TAD28 (1-3/4");TAD34 (2-1/8")SD10 (Screwdriver)Don't see what you are looking for? Give us a call: 800-282-2837.Prices may not reflect recent price increases or manufacturer's surcharges.Main Contents Index- This Section ORDERMORSEHIT-48-112Three tooth 1-1/2” carbide tipped holesaw designed for wood and fiberglassdoors. Requires a mandrel with a longerthan normal pilot bit. Use mandrel # HIT-48-320.527-0335 HIT-48-112 $29.50HIT-48-218Three tooth 2-1/8” carbide tipped holesaw designed for wood and fiberglass doors.Requires a mandrel with a longer than normal pilot bit.Use mandrel # HIT-48-320.527-0340 HIT-48-218 $37.50HIT-48-300Replacement 1/4” diameter pilot bit. Drill BitsOrder # Item # Catalog Price527-0345 HIT-48-300 $6.50HIT-48-310Mandrel for use with our 1” diameter hole saw.527-0350 HIT-48-310 $31.00HIT-48-320Mandrel for use with our 1-1/4” and larger hole saws.527-0355 HIT-48-320 $43.00The Original High Speed Steel, DeepHole Saw with Built-In ArborOrder # Item # Price Size590-0004 PD-4 $6.92 Pilot Drill590-0012 TAD12 27.04 3/4"590-0014 TAD14 27.04 7/8"590-0015 TAD15 27.04 15/16"590-0016 TAD16 28.32 1"590-0018 TAD18 28.32 1-1/8"590-0024 TAD24 30.88 1-1/2"590-0026 TAD26 30.88 1-5/8"590-0034 TAD34 46.98 2-1/8"590-0030 TADO3L KIT $337.4610 - 49