Ageing and creep behaviour of Zinc-Diecasting-Alloys - International ...

More documents

Recommendations

Info

creep strain in %Ageing and Creep of Zinc-Diecasting AlloysCreep behavior of Z410 under different ageing conditionsKriechdehnung in %1,000,10Z 4103,0 mmRT / 77 MPay = 0,0309x 0,4836R 2 = 0,9994y = 0,0349x 0,4104R 2 = 0,9995y = 0,0252x 0,428R 2 = 0,9997y = 0,0255x 0,4394R 2 = 0,9998Gradient isdepending fromageing time0,011 10 100 Zeit in h 1.000as cast 105°/8h 105°/24h 105°/101htime in hW.Leis / L.KallienPrague 13.-14. June 2013
Ageing and Creep of Zinc-Diecasting AlloysCreep rate at RT for Z410 as a function of ageing time and thickness0,10000Creep rate vs Ageing timestress 76 MPaartificially aged at 105°CUmi 21 years0,01000creep rate in %/h0,00100thickness 1,5 mmthickness 3,0 mm0,000101 % per yearcreep rate calculated at 1 % creep strain0,000011 10 100 1.000 10.000ageing time in hW.Leis / L.KallienPrague 13.-14. June 2013
Page 1 and 2: Ageing and Creep of Zinc-Diecasting
Page 3: Ageing and Creep of Zinc-Diecasting
Page 6 and 7: stress [MPa]Ageing and Creep of Zin
Page 29: creep rate in %/hAgeing and Creep o
Page 33 and 34: creep strain in %Ageing and Creep o
Page 37: Ageing and Creep of Zinc-Diecasting

Ageing and creep behaviour of Zinc-Diecasting-Alloys - International ...

Create successful ePaper yourself

Delete template?

Save as template?