Wide Area Siren Options - Klaxon Signals Ltd.

Wide Area Siren OptionsMotor Driven SirensFeatures◗ Simple robust technology◗ ATEX approved or safe area siren options◗ Cost effective high audible outputMotor Driven Sirens are not suitable for applications that require;Siren operation during power failureMore than 2 alarm signalsPrevention or restriction of siren operation to determine its operational statusLarge distances between the siren and 3 phase power source due to installation costs.Where unit weight at height is a constraintElectronic SirensFeatures◗ Fault diagnosis and silent test facility - the siren performs silent tests at a userdefined time period to determine the operational capability of the siren and thenrelays the results to a monitoring point.◗ Battery powered siren operation means loss of site power has no effect on thefunctionality of the siren. An AC power supply is only required to maintain batterycharge.◗ Up to 8 different user defined alarm signals can be activated via volt freecontacts and more when a RS485 interface is used as a means of control.◗ Pre-recorded voice or public address (PA) message capability.◗ Low installation costs because the siren only requires a 110/230V AC supply insteadof the 400V AC 3 phase supply required for motor driven sirens.◗ Siren system can be charged from a solar panel array for use in remote locations.◗ Variable sound levels for each warning signal enables on-site and off-site warningthrough the same siren.◗ Contains two user definable schedulers for time signalling.Electronic Sirens are not suitable for applications that require;ATEX approved sirens. However, the siren can drive 100V ATEX approved line drivenequipment for specific hazardous area locations.Klaxon Signals LimitedWrigley Street, OldhamLancashire, UK OL4 1HWT. +44 (0)161 287 5555F. +44 (0)161 287 5511E. sales@klaxonsignals.comw. www.klaxonsignals.com