Delec Oratis Intercom Brochure - PDF - Aspen Media.

Name Number of Ports Interface Format OtherIF 8A 8 CAT-5 Cable / RJ45 AnalogueAudio ConnectionSubscriber Panel and 4-wire Board,one bidirectional Audio Channel per PortIF 8DIG 8 CAT-5 Cable / RJ45 AES3 Subscriber Panel and 4-wire Board,two bidirectional Audio Channels per PortIF 8COAX 8 Coax 75Ω Cable / BNC AES3 Subscriber Panel Board,two bidirectional Audio Channels per PortIF MADI1 64 LC SFP-Module* MADI Interface 64 bidirectional Audio Channels,freely scalable,optional rendundant connectionIF Link LC SFP-Module* Redundant Fibre Optic BoardIF Dante 64 CAT-5 Cable / RJ45 Audio over IP 64 bidirectional Audio Channels,compatible with Dante standard,AVB ReadyDSP 1depends onthe applicationPlug on moduleSHARC DSPAudio DSP: Attached if neededSome applications need extra audio processing such as EQand dynamics processors. In oratis, these are implementedas optional plug-in DSP modules mounted directly on thecorresponding matrix card.oratis’ DSPs are always accessed through an insert pathon the card. This clever architecture opens up newapplications since it does not occupy additional timeslots on the bus system.In addition to intercom or commentary broadcastapplications, oratis is also qualified for use as the stagemanagement system in theatres. In this applicationoptional DSP on the MADI output cards can carry outequalisation or other audio processing for speaker linesand paging areas.07All matrix cards feature: Audio routing using a flexible and extensibleFPGA configuration Audio in broadcast quality: 48kHz sample rate,24bit word length (with internal 32bit processing) Transparent routing of digital signals Optional DSPs for I/O-signal processing* Fibre Optic Connector can be customized