sub-assembly for which the firm is registered and is entitled forrate contract, could, however, be considered for inclusion in theregistration/rate contract as individual item also.III. The relevant guidelines mentioned in paras 13.20.1, 13.20.5(a), 13.21.6(b)and 13.22.2 of DGS&D Manual will be the basis for registration of items,i.e., spares and accessories, add-on items and in-lieu items, providedthe firm are registered for the main equipment, for which theabove items are required for functioning of main equipment. Noseparate agreement, documents like test reports etc. are requiredfor these items if they are being registered for the main equipment forwhich above items are required for proper functioning.IV. Firms quoting for spares /accessories, add-on items and in-lieu itemsalone ,only and not quoting for main equipment/item are required tobe registered as per the relevant T/E specification. Agreement,documents, test reports etc . applicable for the spares/accessories ,add-on items and in-lieu items are required to be furnished forregistration of these items.LCD <strong>Data</strong> <strong>Wall</strong> <strong>System</strong> Suitable for External controlerSpecification for LCD data wall suitable for externaldata wall controller1. Technology : LCD2. Diagonal Screen Size : Min. 810mm or 1016mm or 1150mm or 1320mm or1390mm or 1500mm or 1650 as applicable as perschedule3. Resolution : 1366X768or 1920X1080 or better as applicable asperschedule4. Aspect Ratio : 16:95. Back light Life : To be declared by the tenderer7. Bacl light type : CFL/ LED8. Signal Input Terminals : Analog RGB/VGA,HDMI/DVI,Component Video/AV Port9. Output : DVI-D10.Power Supply: AC 100 - 240V +/- 10 %,50Hz11.Contrast ratio: 2400:1 or better12.Power Consumption: Not more than 500 watts13.Brightness: To be indicated by the tendererNote : <strong>Data</strong> wall controller is not part of supply against this scheduleOptional Spares For <strong>Data</strong> <strong>Wall</strong> <strong>Display</strong> <strong>System</strong>.Specification of <strong>Data</strong> <strong>Wall</strong> Controller for multi screenviewing for DLP data wall1. Operating <strong>System</strong> Processor : Windows NT/ 2000/ XP or latest2. Processor : Intel Core 2 Duo or better3. Graphic Accelerator : 4 x 64 bit graphic processors4. Color Depth : 32 bit5. Resolution : 1920 X 10806. LAN : Ethernet with TCP/IP (10/100/1000)(protocols TCP/IP,UDP,IGHP,RTP)7. <strong>Data</strong> wall management : To Be providedSoftware8. Input CardPage 14 of 16
a. Video : One Quad Video Input Cardb. RGB : One Dual RGB Input Card9. Out Put Carda. Channel per card : Four RGB/DVI output per Cardb. Format of Card : SD(NTSC/PAL/SECAM)/Full HD10. Upgrade abilitya. Output : Can be up scaled as per User'sRequirements.b. Inputs : RGB & Video Inputs can be increasedas per user's requirements.Specification for <strong>Data</strong> <strong>Wall</strong> Controller for multi screenviewing for LCD <strong>Data</strong> wall1. Operating <strong>System</strong> Processor : Windows NT/ 2000/ XP or latest2. Processor : Intel Core 2 Duo or better3. Graphic Accelerator : 4 x 64 bit graphic processors4. Color Depth : 32 bit5. Resolution : 1920 X 10806. LAN : Ethernet with TCP/IP (10/100/1000)(protocols TCP/IP,UDP,IGHP,RTP)7. <strong>Data</strong> wall management : To Be providedSoftware8. Input Carda. Video : One Quad Video Input Cardb. RGB : One Dual RGB Input Card9. Out Put Carda. Channel per card : Four RGB/DVI output per Cardb. Format of Card : SD(NTSC/PAL/SECAM)/Full HD10. Upgrade abilitya. Output : Can be up scaled as per User'sRequirements.b. Inputs : RGB & Video Inputs can be increasedas per user's requirements.Page 15 of 16