Button Rail Spec - Livers Bronze
Button Rail Spec - Livers Bronze
Button Rail Spec - Livers Bronze
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
C. Glass:1. Type: Tempered plate glass.2. Thickness: 1/2 inch.3. Height: Top of glass to be 42” above finished floor4. Maximum width: 60”5. Minimum width: 6”<strong>Spec</strong>ifier Notes: <strong>Spec</strong>ify glass color. Consult <strong>Livers</strong> <strong>Bronze</strong> for availability of other colors andcustom patterns.6. Color: [Clear] [Gray tint] [<strong>Bronze</strong> tint] [low iron]7. Glazing Material: ANSI Z97.1.8. Field glaze glass panels.C. Side Mounted Assist Handrail: 1-1/2-inch diameter, [Type 304 stainless steel] [bronze][extruded aluminum] handrail with standard RB 2000 stainless steel bracket. 2” diameterhardwood also available (SPECIFY: Wood <strong>Spec</strong>ies)D. Cap <strong>Rail</strong>: [<strong>Rail</strong> to cap top of glass is optional. If cap rail is desired, the side mounted assisthandrail will only be required by code at stair locations.]Cap rail choices include:1) Minimal channel (MN Profile) in stainless steel (#4 long grain or #8 polished)2) 1.5” OD (RD Profile) in stainless steel (#4 long grain, #8 polished) or aluminum (powdercoat)E. Handrail Finishes:1. Finish: ____________________ Stainless Steel: Circular #4 satin (or #8 polished)<strong>Bronze</strong> handrails: Circular #4 satin (or #8 polished) and lacquer.Wood handrails: Sanded, final field finish by other trade.2. Aluminum: Powder Coat1) Color: ____________________ [Choose from manufacturers standards]2) Texture: __________________ [Choose from manufacturers standards]PART 3EXECUTION3.1 EXAMINATIONA. Examine areas to receive railing system. Notify Architect if areas are not acceptable. Do notbegin installation until unacceptable conditions have been corrected.3.2 INSTALLATIONA. Install railing system in accordance with manufacturer's instructions using manufacturer’strained installers or an installer acceptable to the specified manufacturer.B. Install railing system plumb, level, square, true to line, and rigid.C. Attach railing system securely in place using fasteners supplied or approved by manufacturer.All embedded anchor plates and supporting steel shall be provided by another trade andcoordinated with the railing supplier.D. Attach railing system to supports as indicated on the drawings and as approved bymanufacturer.Ornamental <strong>Rail</strong>ing System – 05 73 00 - 4BUTTON RAILRev 8.17.06
Change language