Oakworks Medical Products - englisch

More documents

Recommendations

Info

pain management positioningspine positioning system IINew & Improved!• Optimal ImagingHigh radiolucency and flexibilityfor ideal cervical, thoracic andlumbar visualization.• Enhanced Patient ComfortMinimize unwanted movement andreduce procedure time.• Easy Set-upsNew simplified system of padsminimize the complexity of set-up.• Stable DesignNew, larger contoured torso padcradles patient & the strap securelyfastens the system to the table.Radiolucent frameCrescentFace Rest PadRadiolucent frame withadjustable face restUsed to support the Torso support and Crescent face rest pad.One cam lock facilitates cervical flexion and extension.Adequate free space under see through face section foraeration, supplemental O2, jaw/face contact as necessary;prevents patient overheating, can more easily communicatewith the patient without sound muffling.Stabilizing StrapNew strap system secures SPS II to the table.Product specsWeightframe with face restCrescent Face Padcontoured Torso Support padcontoured torso wedgelarge Adjuster Padsmall Adjuster Pad16 lbs (7kg)12” x 32.5” (30 x 84cm)12” (30cm) diameter6.5” x 23” x 30” (17 x 58 x 76cm)2” x 22” x 29” (5 x 56 x 74cm)8” x 22” x 2” (20 x 56 x 5cm)7” x 12” x 1.5” (18 x 30 x 4cm)8” semi-round bolster 6” x 8” x 26” (15 x 20 x 66cm)Framecarry casewarrantysafety standardsContouredTorsoWedge8” x 22” x 2”Large adjuster pad7” x 12” x 1.5”Small adjuster padContoured Torsosupport pad8” x 26” semiroundbolsterrAdiolucent FrameFrame, Fabric and Padding - 2 yearsFDA listed, CE markedFDA listed to regulation #892.1830 – Class 1; CE marked– to CE Declaration of Conformity to Annex I of the ECDirectives 90/385/EEC and 93/42EEC.SPS II available through select dealers only.Please contact us for a complete list.Page 17
The Spine Positioning System II (SPS II) is an integral component of the pain management fluoroscopy suite. With thissystem, procedural set up time is reduced, patient comfort is enhanced, and unwanted movement is minimized. Mostimportantly, the target anatomy is more readily visualized, which allows the physician to perform spine procedures in a moreefficient and secure manner.OAKWORKS ® designed the SPS II in an effort to achieve the critical balance between optimal imaging and patient comfort.The radiolucent adjustable frame and versatile padding system provide a metal-free imaging support platform capable ofquickly positioning a wide variety of patient physiques. The adjustable face rest position provides individualized positioning forall types of cervical procedures and anatomy. The contoured torso support pad is complimented by a host of uniquely shapedand sized adjuster pads and wedges that enable a multitude of positioning combinations for ideal patient comfort and imagingneeds for all spinal column procedures.The SPS II was designed with the input of experienced interventional spine physicians under the direction of Paul Dreyfuss,MD. An extensive trial period was undertaken such that various modifications were made to accommodate the precise needs ofthe interventional pain physician and their patients.Primary advantages of the Spine Positioning System II:• No metal (radiopaque) components are present underthe spine- unobstructed visibility of the entire spinefrom C0-C1 to the coccyx with all imaging angles(AP, oblique and lateral). All radiopaque componentsare placed proximal to the forehead.• Adjustment easily made to maximize openingand imaging of the cervico-thoracic junction.• Secure and easy to use single locking face restmechanism to adjust cervical flexion, extensionand height.• Torso pad elevation under the chest allows forthe shoulders to drop out of the plane of imagingwhen obtaining a lower cervical and upperthoracic lateral and oblique views.• Adequate free space under open air face sectionfor aeration, supplemental O2, jaw/face contactas necessary; prevents patient overheating andeasy communication with the patient withoutsound muffling.• Contoured torso support allows the shouldersto drop yet be adducted/slightly extended nextto the body for comfort where they are alsoless likely to lose position/fall off thefluoroscopic table.made in the USAwith US & imported partsFDA listed to regulation #892.1830 – Class 1; CE marked– to CE Declaration of Conformity to Annex I of the ECDirectives 90/385/EEC and 93/42EEC.• Current design obviates the need to pull thearms back to the side to obtain imaging of thecervico-thoracic junction; the more comfortableadducted and slightly extended position suffices.• Adequate adjuster pads to maximize torsobuild up for larger frame patients.• Not only for cervical cases; also useful forthoracic and lumbar cases.• Comfortable for patients with cervical painwhen longer duration thoracic and lumbarcases are performed.• Softer foam under the breasts and shouldersfor comfort; firmer central foam for enhancedstability.• Wider and longer torso pad gives extra supportresulting in less sway and improved patient comfort.• Torso pad restraint strap secures the pad to the table;more stability when mounting and dismounting the system.• Torso pad with abdominal recess for extracomfort and support.• All prone positioning needs met with the SPS II;no need for additional pillows.• Very firm adjuster wedges prevent unduecompression and loss of the original position.pain management positioningPage 18
Page 3 and 4: Position for Successour missionOakw
Page 5: c-ARM IMAGING table overviewTOP DIM
Page 11 and 12: cfpm1001 Movement TableElectric adj
Page 13: dtpm3003 Movement Table±14º23" Ma
Page 20 and 21: pain management positioningThe foll
Page 22 and 23: Accessoriespatient safety strap•
Page 24: OAKWORKS medical tables & accessori

Oakworks Medical Products - englisch

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?