USA 2009 - 2010 - Lumascape

12 LS343 Pre-Installation BlockoutIngradeWhy Use Pre-Installation BlockoutThis type of installation requires the LS640-K pre-installation kit (order separately) which acts as a blockout, and is intended for installation beforethe luminaire. This method ensures the luminaire itself is not damaged during concreting or other site works, and also allows for all wiring tobe completed prior to luminaire placement. Pre-installation also allows for off-site maintenance, via the detachable IP68 connector fitted on theluminaire housing. The mating connector on the cable has a sealing cap which ensures water does not enter the cable before the installation iscompleted. Pre-installation is required for all drive-over applications.Cable Entry Option for Pre-Installation BlockoutLens OptionsIP68 Connector & Splice BoxThe luminaire is fitted with an IP68connector, which attaches directly to thecable supplied with LS640-K, without theuse of any tools. The cable is 1.8ft (0.56m)in length, and is factory assembled with a 4way splice box.OptiClear GlassGlass of very highoptical purity and loadstrength. Suitable fordrive-over applications.GripGlassOptiClear glass withslip reduction glazingprocess. Suitable fordrive-over applications.Borosilicate GlassIdeal for general useareas. Not suitable fordrive-over application.Cover Options for Pre-Installation BlockoutFlush covers for pre-installation use specialseals and support bushes to ensure static loadsup to 9 260 lb (4 200kg) are properly supported.In order to achieve this drive-over rating,OptiClear or GripGlass must be used.Pre-Installation Blockout Round Flush Cover• SS316: Polished • Brass: Polished• SS316: Brushed • Brass: BrushedØ 7.0in(178mm)Ø 10.3in (262mm)Ø 7.5in (191mm)