DORMA MANET

MANETSingle-point fixingSingle-point fixing serie S32/35The basic component withinthe MANET system is thesingle-point fixing a basicrather than cylindrical bore inthe glass, has a tapered countersunkbore for a perfect seatedfit to the glass. These givea flush finish of the singlepointfixing in all applications.The three-dimensional adjustabilityincorporated withinthe fitting ensures ideal compensationfor structural anddrilling tolerances.Constraint-free transmissionof all the forces acting on theglass to the substructure isalso ensured.1Threaded rod M8 withsmall head (eg DIN 6912).Length and type to suitWallplug on site towallplug.suit wall construction.3-dimensionaladjustment654Aperture forpost-installationAdjustment screwadjustment of screwallows offset fromwall to be altereddepending on typeof fitting.Post-installation adjustment2 3 of ± 2 mm horizontally andvertically by rotatingthe oblong hole.Components1 Clip-on cover2 Pin internal thread3 Conical sleeve4 Gasket5 Fixing6 Adjustment screwInstallation and adjustmentTransfer the drillingpoints from the installationdrawing to the wall.Drill anchor holes for wallplugs.Undo adjustment fastenerand secure to the wall.Only lightly tighten fastenerso that it can still bemoved.Mount the fixing and washerand fit the glass.Undo the adjustmentfastener and then secure infinal position.Align single-point fixingsand secure with grub screw.Fit tapered nut and clampingring and tighten withspecial wrench (tighteningtorque 15 Nm).Clip on covers.4 07/04