You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL CHARACTERISTICSTD410 diode-pumped LaserResolution < 3 µmLenses available F-100 / F-160 / F-254Marking area70x70 / 120x120 / 180x180mmControl unit UC410-Rack 19” L 485 x W 480 x H 267mmWeight & dimensions: (laser included)Weight75kgDimensionsW 590 x H 827 x D 806mmSlotted tableW 500 x D 350mmMarked partsW 400 x H 330* x D 300mmmaximum dimensions *(ref. Height table)Included:• Motorized Z-axis – travel 265mm• Red pointer• T700W marking software• F-160 Flat Field LensSafety & protection:Class 1Conformity to european and USA/Canada standardsPower supply:Power supplyElectrical consumptionCooling system115/230 V< 800 Wby airOptions:• Fume and dust extraction systems:-Vacuum tube on marking area-Fume and dust extractor• Circular marking device DMC11• Handheld Data Matrix readerCLEARANCE UNDER THE HEADTable and computer : optionalMaximum head adjustment height: 465mm from worktableMinimum head adjustment height: 200mm from worktableCalculate the part’s dimensions depending on the lens usedLENS F-100 F-160 F-254Plastics and metal markingCircular marking systemTraceability functions integratedWorking distance 135mm 215mm 345mmMaximum heightof parts to be marked 330mm 250mm 120mm(465mm-working distance)Minimum height 65mmof parts to be marked (part or - -(200 mm-working distance) part +fixture)WORKTABLE465mm200mmDPGB060201 - DCD04/292 - LASERTOP - TECHNIFOR - RCS BOURG B 320 624 331 - Technifor reserves all rights on improvement on its products. This document is not contractual.DIPES Lyon. Printed in France. Photos DIPES. ® Windows is a registered trademark of Microsoft US Corp.114, quai du Rhône - F-01708 MIRIBEL CedexTel : +33 (0)4 78 55 85 50 - Fax : +33 (0)4 78 55 85 60E-mail : tf@technifor.comwww.technifor.com