NewTec Display Co., Ltd.

More documents

Recommendations

Info

-8-bit interfaceWait for more than 15 ms after Vcc rises to 4.5VBF can not be checked before this instruction.RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB00 0 0 0 1 1 * * * *Function se (interface is 4 bits long)Wait for more than 4.1 msBF can not be checked before this instruction.RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB00 0 0 0 1 1 * * * *Function se (interface is 8 bits long)Wait for more than 100 sBF can not be checked before this instruction.RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB00 0 0 0 1 1 * * * *Function se (interface is 8 bits long)RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB00 0 0 0 1 1 N F * *BF can be checked after the following instructions.When BF is not checked, the waiting time betweeninstructions is longer than execution instruction time.0 0 0 0 0 0 1 0 0 00 0 0 0 0 0 0 0 0 10 0 0 0 0 0 0 1 I/D SInitialization endsFunction set (interface is 8 bits long. Specify thenumber of display lines and character font)The number of display lines and character font can notbe changed after this point.Display offDisplay clearEntry mode set8-Bit interfaceNew Tec Display Co., Ltd. 30 of 31Copyright by NEWTEC DISPLAY CO., LTD. All rights reserved.
-13. Outline drawingH1H22.0H1MaxH21.6LED B/L9.4 MAX4.81.6EL or NO B/LVssVoRSR/WEHigh Low13.212.18.67.5The tolerance of non-specified dimension is 0.3mm.01/1NEWTEC DISPLAY CO., LTD1/1LCM DrawingNC1602D7.511.5A15.07.0K6- 1.04- 2.5 PTH4- 5.0 PAD3.550.592.96DOT SIZESCALE 5/10.60.560.660.75.565.940.3885.0 0.571.266.0(VA)56.21(AA)81.07.910.515.41 Vdd234567 DB0891011DB1DB2DB3DB412 DB51314DB6DB715.03.09.257.02.4131424.011.5(AA)16.0(VA)25.230.0 0.51243.52.02.542.07.3814- 1.0 PTH14- 1.8 PAD131415.2412(P2.54*6)PIN DETAILNew Tec Display Co., Ltd. 31 of 31Copyright by NEWTEC DISPLAY CO., LTD. All rights reserved.
Page 4: -1.Numbering systemN C 1602 D - G H
Page 8 and 9: 5. Electrical Characteristics-Item
Page 11 and 12: -8. Power Supply for LCD Module and
Page 13 and 14: -Supply Voltage V 3.2 3.4 V Reverse
Page 15 and 16: -10. Quality Assurance10.1 Inspecti
Page 17 and 18: -(1)Pixel shape (with Dent )0.152 (
Page 19 and 20: -12. Controller data12.1 Function d
Page 21 and 22: -Relationship between CGRAM Address
Page 23 and 24: -C ode PSPN PM: English -Japanese F
Page 25 and 26: Code MS MM: English -European FontU
Page 27 and 28: -12.5 Timing characteristicsWrite O
Page 29: 12.6 Initializing soft ware of LCM4

NewTec Display Co., Ltd.

Create successful ePaper yourself

Delete template?

Save as template?