CONDUIT - HD Supply

CONDUIT FITTINGS Elbows & ConnectorsConduitArlington IndustriesEMT Compression ConnectorsZinc die-castUL listed concrete tightModel No.Hughes No.UPCCodeConduitSize (In.)HoleDiameter (In.) Unit*Listed for use with steel and aluminum EMT, IMC and rigid conduit.List PriceUninsulated820 HACY517 00820 1/2 1/2 EA $0.78821 HACY520 00821 3/4 3/4 EA 0.86822 HACY523 00822 1 1 EA 1.54823 HACY526 00823 1-1/4 1-1/4 EA 3.19824 HACY529 00824 1-1/2 1-1/2 EA 4.94825 HACY530 00825 2 2 EA 7.11826* HAKB890 00826 2-1/2 2-1/2 EA 22.47827* HAKC112 00827 3 3 EA 29.66828* HBCB506 00828 3-1/2 3-1/2 EA 42.17829* HBCB557 00829 4 4 EA 46.02With Insulated Throat820A HAKB993 82010 1/2 1/2 EA 1.03821A HAKC410 82110 3/4 3/4 EA 1.27822A HAXI692 82210 1 1 EA 1.84823A HBBF705 82310 1-1/4 1-1/4 EA 4.69824A HAJF704 82410 1-1/2 1-1/2 EA 7.10825A HBCA803 82510 2 2 EA 10.18826A* HCAA542 82610 2-1/2 2-1/2 EA 44.52827A* HAJE748 82710 3 3 EA 53.56828A* HAJQ702 82810 3-1/2 3-1/2 EA 73.09829A* HCAA543 82910 4 4 EA 81.65EMT Set-Screw ConnectorsZinc die-castConcrete tightModel No.Hughes No.UPCCodeConduitSize (In.)HoleDiameter (In.) UnitAdd suffix "RH" for Robertson Head Screws.*Concrete tight when taped.†Listed for use with steel and aluminum EMT, IMC and rigid conduit.List PriceUninsulated800 HACY739 00800 1/2 1/2 EA $0.50801 HACY743 00801 3/4 3/4 EA 0.80802 HACY745 00802 1 1 EA 1.29803 HACY750 00803 1-1/4 1-1/4 EA 2.25804* HACY752 00804 1-1/2 1-1/2 EA 3.35805* HACY754 00805 2 2 EA 4.58806* † HBCB561 00806 2-1/2 2-1/2 EA 14.08807* † HBCB563 00807 3 3 EA 18.688075* † HAYN994 08075 3-1/2 3-1/2 EA 24.27808* † HBCB566 00808 4 4 EA 25.66With Insulated Throat800A HAHN737 80010 1/2 1/2 EA 0.77801A HAGU643 80110 3/4 3/4 EA 1.18802A HAGU554 80210 1 1 EA 1.87803A HCAA943 80310 1-1/4 1-1/4 EA 4.27804A* HCAA946 80410 1-1/2 1-1/2 EA 5.30805A* HCAA954 80510 2 2 EA 7.70806A* † HCAA956 80610 2-1/2 2-1/2 EA 27.88807A* † HCAA957 80710 3 3 EA 36.358075A* † HCAA958 80711 3-1/2 3-1/2 EA 46.37808A* † HAYS919 80810 4 4 EA 52.64See page 599 for MilwaukeeMagnum ® DrillsPull ElbowsCombination Threaded Rigid and Set-Screw EMT90° pulling elbows with cover and gasket. Zinc die-cast.Arlington's combination hubs are threaded for rigid and includesetscrews for EMT. The set-screws may be used for rigid, but are notnecessary. They are listed raintight with rigid and concrete-tight whentaped for EMT. These products can also be used for EMT to rigid.Model No. Hughes No. UPC CodeConduitSize (In.) Unit List PriceHL5000 HAKR353 83105 1/2 EA $3.08HL7500 HAKR385 83175 3/4 EA 3.49HL100 HEGY172 50171 1 EA 9.44HL125 HATJ630 50173 1-1/4 EA 12.46430 hdsupply.com