MOVITRAC LT Catalogue - SEW-Eurodrive

General specifications4Standard parameters4.11 Standard parametersPar Description Range DefaultP-01 1)Max speed limit (Hz or rpm) max. 500 Hz 50 HzP-02 1) Min speed limit (Hz or rpm) 0 ... P-01 (max. 500 Hz) 0 HzP-03 Accel ramp time (s) 0.0 s … 3000 s 5 sP-04 Decel ramp time (s) 0.0 s … 3000 s 5 sP-05 Stop mode select Ramp to stop / coast to stop Ramp to stopP-06 V/F characteristic 0 Constant torque V/f1 Pump-Fan V/f²0 (V/f)P-07 Rapid decel ramp time 0.0 s … 25 s (disabled when 0.0 s) 0.0 sP-08 Motor rated current limit 0 to current rating of drive (Amps) Rated I-DriveP-09 Motor rated frequency 25 ... 500 Hz 50 Hz60 Hz (USA & Canada only)P-10 Motor rated speed 0 ... 60,000 rpm 0P-11 Voltage boost 0 ... 25 % of max output voltage 3 %P-12 Terminal / Keypad control of drive 0 Terminal control 0 (terminal)1 Keypad control (fwd only)2 Keypad control (fwd / rev to togglebetween fwd and rev using start button)P-13 Trip log Last four trips stored no faultP-14 Extended menu access code 0 ... 9999 01) If the motor rated speed in rpm has been entered into P-10, parameters P-01, P-02, P-20 ... P-23, P-27 and P-28 are in rpm.16 Catalog – MOVITRAC® LT E